lib/xlat/include/xlat_defs.h

/*
 * SPDX-License-Identifier: BSD-3-Clause
 * SPDX-FileCopyrightText: Copyright TF-RMM Contributors.
 * SPDX-FileCopyrightText: Copyright Arm Limited and Contributors.
 */

/* This file is derived from xlat_table_v2 library in TF-A project */

#ifndef XLAT_DEFS_H
#define XLAT_DEFS_H

#include <arch.h>
#include <utils_def.h>

/*
 * The ARMv8-A architecture allows translation granule sizes of 4KB, 16KB or 64KB.
 *
 * Only 4K granularities are allowed on this library.
 */
#define PAGE_SIZE		(UL(1) << XLAT_GRANULARITY_SIZE_SHIFT)
#define PAGE_SIZE_MASK		(PAGE_SIZE - UL(1))
#define IS_PAGE_ALIGNED(addr)	(((addr) & PAGE_SIZE_MASK) == U(0))

#define XLAT_ENTRY_SIZE_SHIFT	UL(3)	/* Each MMU table entry is 8 bytes */
#define XLAT_ENTRY_SIZE		(UL(1) << XLAT_ENTRY_SIZE_SHIFT)

/* Size of one complete table */
#define XLAT_TABLE_SIZE_SHIFT	XLAT_GRANULARITY_SIZE_SHIFT
#define XLAT_TABLE_SIZE		(UL(1) << XLAT_TABLE_SIZE_SHIFT)

/* Level 3 is the highest level for translation tables */
#define XLAT_TABLE_LEVEL_MAX	3

/* Values for number of entries in each MMU translation table */
#define XLAT_TABLE_ENTRIES_SHIFT (XLAT_TABLE_SIZE_SHIFT - XLAT_ENTRY_SIZE_SHIFT)
#define XLAT_TABLE_ENTRIES	(U(1) << XLAT_TABLE_ENTRIES_SHIFT)
#define XLAT_TABLE_ENTRIES_MASK	(XLAT_TABLE_ENTRIES - U(1))

/* Values for number of entries in a MMU translation table at level -1 */
#define XLAT_LM1_TABLE_ENTRIES_SHIFT	(4U)
#define XLAT_LM1_TABLE_ENTRIES		(U(1) << XLAT_LM1_TABLE_ENTRIES_SHIFT)
#define XLAT_LM1_TABLE_ENTRIES_MASK	(XLAT_LM1_TABLE_ENTRIES - U(1))

/*
 * Return the number of entries per table base on the level.
 * This macro does not consider whether FEAT_LPA2 is available and/or enabled
 * and it does not make any sanity check on `_level`.
 */
#define XLAT_GET_TABLE_ENTRIES(_level)					\
	((_level == XLAT_TABLE_LEVEL_MIN) ?				\
		XLAT_LM1_TABLE_ENTRIES : XLAT_TABLE_ENTRIES)

/*
 * Return the xlat table entry mask as per the table level.
 * This macro does not consider whether FEAT_LPA2 is available and/or enabled
 * and it does not make any sanity check on `_level`.
 */
#define XLAT_GET_TABLE_ENTRIES_MASK(_level)				\
	((_level == XLAT_TABLE_LEVEL_MIN) ?				\
		XLAT_LM1_TABLE_ENTRIES_MASK : XLAT_TABLE_ENTRIES_MASK)

/* Values to convert a memory address to an index into a translation table */
#define L3_XLAT_ADDRESS_SHIFT	XLAT_GRANULARITY_SIZE_SHIFT
#define L2_XLAT_ADDRESS_SHIFT	(L3_XLAT_ADDRESS_SHIFT + XLAT_TABLE_ENTRIES_SHIFT)
#define L1_XLAT_ADDRESS_SHIFT	(L2_XLAT_ADDRESS_SHIFT + XLAT_TABLE_ENTRIES_SHIFT)
#define L0_XLAT_ADDRESS_SHIFT	(L1_XLAT_ADDRESS_SHIFT + XLAT_TABLE_ENTRIES_SHIFT)
#define LM1_XLAT_ADDRESS_SHIFT	(L0_XLAT_ADDRESS_SHIFT + XLAT_TABLE_ENTRIES_SHIFT)
#define XLAT_ADDR_SHIFT(level)	((unsigned int)(XLAT_GRANULARITY_SIZE_SHIFT +	  \
				((unsigned int)(XLAT_TABLE_LEVEL_MAX - (level)) * \
						XLAT_TABLE_ENTRIES_SHIFT)))

#define XLAT_BLOCK_SIZE(level)	(UL(1) << XLAT_ADDR_SHIFT(level))
/* Mask to get the bits used to index inside a block of a certain level */
#define XLAT_BLOCK_MASK(level)	(XLAT_BLOCK_SIZE(level) - UL(1))
/* Mask to get the address bits common to a block of a certain table level*/
#define XLAT_ADDR_MASK(level)	(~XLAT_BLOCK_MASK(level))
/*
 * Extract from the given virtual address the index into the given lookup level.
 * This macro assumes the system is using the 4KB translation granule.
 */
#define XLAT_TABLE_IDX(virtual_addr, level)	\
	(((virtual_addr) >> XLAT_ADDR_SHIFT(level)) & ULL(0x1FF))

/*
 * Minimum table level supported by the architecture when FEAT_LPA2 is present.
 * Since the library is in charge of calculating the minimum level when creating
 * the translation tables, due to presence of checks for VA size and PA size,
 * the library would not create a table at level -1 on a non LPA2 system.
 * Hence there is no need to differentiate the value of this macro for non
 * LPA2 case.
 */
#define XLAT_TABLE_LEVEL_MIN	(-1)

/* Mask used to know if an address belongs to a high va region. */
#define HIGH_REGION_MASK	ADDR_MASK_52_TO_63

/*
 * Define the architectural limits of the virtual address space in AArch64
 * state.
 *
 * TCR.TxSZ is calculated as 64 minus the width of said address space.
 * The value of TCR.TxSZ must be in the range 16 or 12 to 48 [1], which
 * means that the virtual address space width must be in the range 48 or 52
 * to 16 bits respectively.
 *
 * [1] See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
 * information:
 * Page 1730: 'Input address size', 'For all translation stages'.
 * and section 12.2.55 in the ARMv8-A Architecture Reference Manual
 * (DDI 0487D.a)
 */
/*
 * Maximum value of TCR_ELx.T(0,1)SZ is 48 for a min VA size of 16 bits.
 * RMM is only supported with FEAT_TTST implemented.
 */
#define MIN_VIRT_ADDR_SPACE_SIZE	(UL(1) << (UL(64) - TCR_TxSZ_MAX))

/* Minimum value of TCR_ELx.T(0,1)SZ is 16, for a VA of 48 bits */
#define MAX_VIRT_ADDR_SPACE_SIZE	(UL(1) << (UL(64) - TCR_TxSZ_MIN))

/*
 * With LPA2 supported, the minimum value of TCR_ELx.T(0,1)SZ is 12
 * for a VA of 52 bits.
 */
#define MAX_VIRT_ADDR_SPACE_SIZE_LPA2	(UL(1) << (UL(64) - TCR_TxSZ_MIN_LPA2))

/*
 * Here we calculate the initial lookup level from the value of the given
 * virtual address space size. For a 4 KB page size,
 * - level -1 (if FEAT_LPA2 is supported) supports virtual addresses spaces from
 *   52 to 49 bits;
 * - level 0 from 48 to 40;
 * - level 1 from 39 to 31;
 * - level 2 from 30 to 22.
 * - level 3 from 21 to 16.
 *
 * Small Translation Table (Armv8.4-TTST) support allows the starting level
 * of the translation table from 3 for 4KB granularity. See section 12.2.55 in
 * the ARMv8-A Architecture Reference Manual (DDI 0487D.a). See section
 * D4.2.5 in the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
 * information.
 *
 * For example, for a 35-bit address space (i.e. virt_addr_space_size ==
 * 1 << 35), TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table
 * D4-11 in the ARM ARM, the initial lookup level for an address space like that
 * is 1.
 *
 * Note that this macro assumes that the given virtual address space size is
 * valid.
 */
#define GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_sz)			\
	(((_virt_addr_space_sz) > (ULL(1) << LM1_XLAT_ADDRESS_SHIFT))	\
	? -1								\
	: (((_virt_addr_space_sz) > (ULL(1) << L0_XLAT_ADDRESS_SHIFT))	\
	? 0								\
	: (((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT))	\
	? 1								\
	: (((_virt_addr_space_sz) > (ULL(1) << L2_XLAT_ADDRESS_SHIFT))	\
	? 2 : 3))))

#endif /* XLAT_DEFS_H */