Platform: Use CMSIS Driver headers from CMSIS repo
Most CMSIS headers are now included directly from the CMSIS repo, but
the CMSIS Driver headers are not and have gone stale compared to the
version of CMSIS used by TF-M. This patch removes the CMSIS Driver
header copies from TF-M in favour of including them directly from the
CMSIS repo.
Signed-off-by: Jamie Fox <jamie.fox@arm.com>
Change-Id: I7d72df09ff56e4255a2db945f7ffc6000dfd4413
diff --git a/cmake/install.cmake b/cmake/install.cmake
index 0297080..0079dd3 100644
--- a/cmake/install.cmake
+++ b/cmake/install.cmake
@@ -243,6 +243,7 @@
install(CODE "MESSAGE(\"----- Installing platform NS -----\")")
install(DIRECTORY $<BUILD_INTERFACE:${CMSIS_PATH}/CMSIS/Core/Include>
+ $<BUILD_INTERFACE:${CMSIS_PATH}/CMSIS/Driver/Include>
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/cmsis)
if(PLATFORM_DEFAULT_UART_STDOUT)
diff --git a/lib/ext/cmsis/CMakeLists.txt b/lib/ext/cmsis/CMakeLists.txt
index 04e59c2..084f4ff 100644
--- a/lib/ext/cmsis/CMakeLists.txt
+++ b/lib/ext/cmsis/CMakeLists.txt
@@ -33,4 +33,5 @@
INTERFACE
$<BUILD_INTERFACE:${CMSIS_PATH}/CMSIS/Core/Include>
$<BUILD_INTERFACE:${CMSIS_PATH}/CMSIS/Core/Include/m-profile>
+ $<BUILD_INTERFACE:${CMSIS_PATH}/CMSIS/Driver/Include>
)
diff --git a/platform/ext/driver/Driver_Common.h b/platform/ext/driver/Driver_Common.h
deleted file mode 100644
index cdf44b3..0000000
--- a/platform/ext/driver/Driver_Common.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (c) 2013-2016 ARM Limited. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- * $Date: 2. Jan 2014
- * $Revision: V2.00
- *
- * Project: Common Driver definitions
- */
-
-/* History:
- * Version 2.00
- * Changed prefix ARM_DRV -> ARM_DRIVER
- * Added General return codes definitions
- * Version 1.10
- * Namespace prefix ARM_ added
- * Version 1.00
- * Initial release
- */
-
-#ifndef __DRIVER_COMMON_H
-#define __DRIVER_COMMON_H
-
-#include <stddef.h>
-#include <stdint.h>
-#include <stdbool.h>
-
-#define ARM_DRIVER_VERSION_MAJOR_MINOR(major,minor) (((major) << 8) | (minor))
-
-/**
-\brief Driver Version
-*/
-typedef struct _ARM_DRIVER_VERSION {
- uint16_t api; ///< API version
- uint16_t drv; ///< Driver version
-} ARM_DRIVER_VERSION;
-
-/* General return codes */
-#define ARM_DRIVER_OK 0 ///< Operation succeeded
-#define ARM_DRIVER_ERROR -1 ///< Unspecified error
-#define ARM_DRIVER_ERROR_BUSY -2 ///< Driver is busy
-#define ARM_DRIVER_ERROR_TIMEOUT -3 ///< Timeout occurred
-#define ARM_DRIVER_ERROR_UNSUPPORTED -4 ///< Operation not supported
-#define ARM_DRIVER_ERROR_PARAMETER -5 ///< Parameter error
-#define ARM_DRIVER_ERROR_SPECIFIC -6 ///< Start of driver specific errors
-
-/**
-\brief General power states
-*/
-typedef enum _ARM_POWER_STATE {
- ARM_POWER_OFF, ///< Power off: no operation possible
- ARM_POWER_LOW, ///< Low Power mode: retain state, detect and signal wake-up events
- ARM_POWER_FULL ///< Power on: full operation at maximum performance
-} ARM_POWER_STATE;
-
-#endif /* __DRIVER_COMMON_H */
diff --git a/platform/ext/driver/Driver_Flash.h b/platform/ext/driver/Driver_Flash.h
deleted file mode 100644
index 287add1..0000000
--- a/platform/ext/driver/Driver_Flash.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Copyright (c) 2013-2017 ARM Limited. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- * $Date: 2. Feb 2017
- * $Revision: V2.1
- *
- * Project: Flash Driver definitions
- */
-
-/* History:
- * Version 2.1
- * ARM_FLASH_STATUS made volatile
- * Version 2.0
- * Renamed driver NOR -> Flash (more generic)
- * Non-blocking operation
- * Added Events, Status and Capabilities
- * Linked Flash information (GetInfo)
- * Version 1.11
- * Changed prefix ARM_DRV -> ARM_DRIVER
- * Version 1.10
- * Namespace prefix ARM_ added
- * Version 1.00
- * Initial release
- */
-
-#ifndef DRIVER_FLASH_H_
-#define DRIVER_FLASH_H_
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#include "Driver_Common.h"
-
-#define ARM_FLASH_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,1) /* API version */
-
-
-#define _ARM_Driver_Flash_(n) Driver_Flash##n
-#define ARM_Driver_Flash_(n) _ARM_Driver_Flash_(n)
-
-
-#define ARM_FLASH_SECTOR_INFO(addr,size) { (addr), (addr)+(size)-1 }
-
-/**
-\brief Flash Sector information
-*/
-typedef struct _ARM_FLASH_SECTOR {
- uint32_t start; ///< Sector Start address
- uint32_t end; ///< Sector End address (start+size-1)
-} const ARM_FLASH_SECTOR;
-
-/**
-\brief Flash information
-*/
-typedef struct _ARM_FLASH_INFO {
- ARM_FLASH_SECTOR *sector_info; ///< Sector layout information (NULL=Uniform sectors)
- uint32_t sector_count; ///< Number of sectors
- uint32_t sector_size; ///< Uniform sector size in bytes (0=sector_info used)
- uint32_t page_size; ///< Optimal programming page size in bytes
- uint32_t program_unit; ///< Smallest programmable unit in bytes
- uint8_t erased_value; ///< Contents of erased memory (usually 0xFF)
-} const ARM_FLASH_INFO;
-
-
-/**
-\brief Flash Status
-*/
-typedef volatile struct _ARM_FLASH_STATUS {
- uint32_t busy : 1; ///< Flash busy flag
- uint32_t error : 1; ///< Read/Program/Erase error flag (cleared on start of next operation)
- uint32_t reserved : 30;
-} ARM_FLASH_STATUS;
-
-
-/****** Flash Event *****/
-#define ARM_FLASH_EVENT_READY (1UL << 0) ///< Flash Ready
-#define ARM_FLASH_EVENT_ERROR (1UL << 1) ///< Read/Program/Erase Error
-
-
-// Function documentation
-/**
- \fn ARM_DRIVER_VERSION ARM_Flash_GetVersion (void)
- \brief Get driver version.
- \return \ref ARM_DRIVER_VERSION
-*/
-/**
- \fn ARM_FLASH_CAPABILITIES ARM_Flash_GetCapabilities (void)
- \brief Get driver capabilities.
- \return \ref ARM_FLASH_CAPABILITIES
-*/
-/**
- \fn int32_t ARM_Flash_Initialize (ARM_Flash_SignalEvent_t cb_event)
- \brief Initialize the Flash Interface.
- \param[in] cb_event Pointer to \ref ARM_Flash_SignalEvent
- \return \ref execution_status
-*/
-/**
- \fn int32_t ARM_Flash_Uninitialize (void)
- \brief De-initialize the Flash Interface.
- \return \ref execution_status
-*/
-/**
- \fn int32_t ARM_Flash_PowerControl (ARM_POWER_STATE state)
- \brief Control the Flash interface power.
- \param[in] state Power state
- \return \ref execution_status
-*/
-/**
- \fn int32_t ARM_Flash_ReadData (uint32_t addr, void *data, uint32_t cnt)
- \brief Read data from Flash.
- \param[in] addr Data address.
- \param[out] data Pointer to a buffer storing the data read from Flash.
- \param[in] cnt Number of data items to read.
- \return number of data items read or \ref execution_status
-*/
-/**
- \fn int32_t ARM_Flash_ProgramData (uint32_t addr, const void *data, uint32_t cnt)
- \brief Program data to Flash.
- \param[in] addr Data address.
- \param[in] data Pointer to a buffer containing the data to be programmed to Flash.
- \param[in] cnt Number of data items to program.
- \return number of data items programmed or \ref execution_status
-*/
-/**
- \fn int32_t ARM_Flash_EraseSector (uint32_t addr)
- \brief Erase Flash Sector.
- \param[in] addr Sector address
- \return \ref execution_status
-*/
-/**
- \fn int32_t ARM_Flash_EraseChip (void)
- \brief Erase complete Flash.
- Optional function for faster full chip erase.
- \return \ref execution_status
-*/
-/**
- \fn ARM_FLASH_STATUS ARM_Flash_GetStatus (void)
- \brief Get Flash status.
- \return Flash status \ref ARM_FLASH_STATUS
-*/
-/**
- \fn ARM_FLASH_INFO * ARM_Flash_GetInfo (void)
- \brief Get Flash information.
- \return Pointer to Flash information \ref ARM_FLASH_INFO
-*/
-
-/**
- \fn void ARM_Flash_SignalEvent (uint32_t event)
- \brief Signal Flash event.
- \param[in] event Event notification mask
- \return none
-*/
-
-typedef void (*ARM_Flash_SignalEvent_t) (uint32_t event); ///< Pointer to \ref ARM_Flash_SignalEvent : Signal Flash Event.
-
-
-/**
-\brief Flash Driver Capabilities.
-*/
-typedef struct _ARM_FLASH_CAPABILITIES {
- uint32_t event_ready : 1; ///< Signal Flash Ready event
- uint32_t data_width : 2; ///< Data width: 0=8-bit, 1=16-bit, 2=32-bit
- uint32_t erase_chip : 1; ///< Supports EraseChip operation
- uint32_t reserved : 28; ///< Reserved (must be zero)
-} ARM_FLASH_CAPABILITIES;
-
-
-/**
-\brief Access structure of the Flash Driver
-*/
-typedef struct _ARM_DRIVER_FLASH {
- ARM_DRIVER_VERSION (*GetVersion) (void); ///< Pointer to \ref ARM_Flash_GetVersion : Get driver version.
- ARM_FLASH_CAPABILITIES (*GetCapabilities)(void); ///< Pointer to \ref ARM_Flash_GetCapabilities : Get driver capabilities.
- int32_t (*Initialize) (ARM_Flash_SignalEvent_t cb_event); ///< Pointer to \ref ARM_Flash_Initialize : Initialize Flash Interface.
- int32_t (*Uninitialize) (void); ///< Pointer to \ref ARM_Flash_Uninitialize : De-initialize Flash Interface.
- int32_t (*PowerControl) (ARM_POWER_STATE state); ///< Pointer to \ref ARM_Flash_PowerControl : Control Flash Interface Power.
- int32_t (*ReadData) (uint32_t addr, void *data, uint32_t cnt); ///< Pointer to \ref ARM_Flash_ReadData : Read data from Flash.
- int32_t (*ProgramData) (uint32_t addr, const void *data, uint32_t cnt); ///< Pointer to \ref ARM_Flash_ProgramData : Program data to Flash.
- int32_t (*EraseSector) (uint32_t addr); ///< Pointer to \ref ARM_Flash_EraseSector : Erase Flash Sector.
- int32_t (*EraseChip) (void); ///< Pointer to \ref ARM_Flash_EraseChip : Erase complete Flash.
- ARM_FLASH_STATUS (*GetStatus) (void); ///< Pointer to \ref ARM_Flash_GetStatus : Get Flash status.
- ARM_FLASH_INFO * (*GetInfo) (void); ///< Pointer to \ref ARM_Flash_GetInfo : Get Flash information.
-} const ARM_DRIVER_FLASH;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* DRIVER_FLASH_H_ */
diff --git a/platform/ext/driver/Driver_USART.h b/platform/ext/driver/Driver_USART.h
deleted file mode 100644
index 237496b..0000000
--- a/platform/ext/driver/Driver_USART.h
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * Copyright (c) 2013-2017 ARM Limited. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- * $Date: 2. Feb 2017
- * $Revision: V2.3
- *
- * Project: USART (Universal Synchronous Asynchronous Receiver Transmitter)
- * Driver definitions
- */
-
-/* History:
- * Version 2.3
- * ARM_USART_STATUS and ARM_USART_MODEM_STATUS made volatile
- * Version 2.2
- * Corrected ARM_USART_CPOL_Pos and ARM_USART_CPHA_Pos definitions
- * Version 2.1
- * Removed optional argument parameter from Signal Event
- * Version 2.0
- * New simplified driver:
- * complexity moved to upper layer (especially data handling)
- * more unified API for different communication interfaces
- * renamed driver UART -> USART (Asynchronous & Synchronous)
- * Added modes:
- * Synchronous
- * Single-wire
- * IrDA
- * Smart Card
- * Changed prefix ARM_DRV -> ARM_DRIVER
- * Version 1.10
- * Namespace prefix ARM_ added
- * Version 1.01
- * Added events:
- * ARM_UART_EVENT_TX_EMPTY, ARM_UART_EVENT_RX_TIMEOUT
- * ARM_UART_EVENT_TX_THRESHOLD, ARM_UART_EVENT_RX_THRESHOLD
- * Added functions: SetTxThreshold, SetRxThreshold
- * Added "rx_timeout_event" to capabilities
- * Version 1.00
- * Initial release
- */
-
-#ifndef DRIVER_USART_H_
-#define DRIVER_USART_H_
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#include "Driver_Common.h"
-
-#define ARM_USART_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,3) /* API version */
-
-
-/****** USART Control Codes *****/
-
-#define ARM_USART_CONTROL_Pos 0
-#define ARM_USART_CONTROL_Msk (0xFFUL << ARM_USART_CONTROL_Pos)
-
-/*----- USART Control Codes: Mode -----*/
-#define ARM_USART_MODE_ASYNCHRONOUS (0x01UL << ARM_USART_CONTROL_Pos) ///< UART (Asynchronous); arg = Baudrate
-#define ARM_USART_MODE_SYNCHRONOUS_MASTER (0x02UL << ARM_USART_CONTROL_Pos) ///< Synchronous Master (generates clock signal); arg = Baudrate
-#define ARM_USART_MODE_SYNCHRONOUS_SLAVE (0x03UL << ARM_USART_CONTROL_Pos) ///< Synchronous Slave (external clock signal)
-#define ARM_USART_MODE_SINGLE_WIRE (0x04UL << ARM_USART_CONTROL_Pos) ///< UART Single-wire (half-duplex); arg = Baudrate
-#define ARM_USART_MODE_IRDA (0x05UL << ARM_USART_CONTROL_Pos) ///< UART IrDA; arg = Baudrate
-#define ARM_USART_MODE_SMART_CARD (0x06UL << ARM_USART_CONTROL_Pos) ///< UART Smart Card; arg = Baudrate
-
-/*----- USART Control Codes: Mode Parameters: Data Bits -----*/
-#define ARM_USART_DATA_BITS_Pos 8
-#define ARM_USART_DATA_BITS_Msk (7UL << ARM_USART_DATA_BITS_Pos)
-#define ARM_USART_DATA_BITS_5 (5UL << ARM_USART_DATA_BITS_Pos) ///< 5 Data bits
-#define ARM_USART_DATA_BITS_6 (6UL << ARM_USART_DATA_BITS_Pos) ///< 6 Data bit
-#define ARM_USART_DATA_BITS_7 (7UL << ARM_USART_DATA_BITS_Pos) ///< 7 Data bits
-#define ARM_USART_DATA_BITS_8 (0UL << ARM_USART_DATA_BITS_Pos) ///< 8 Data bits (default)
-#define ARM_USART_DATA_BITS_9 (1UL << ARM_USART_DATA_BITS_Pos) ///< 9 Data bits
-
-/*----- USART Control Codes: Mode Parameters: Parity -----*/
-#define ARM_USART_PARITY_Pos 12
-#define ARM_USART_PARITY_Msk (3UL << ARM_USART_PARITY_Pos)
-#define ARM_USART_PARITY_NONE (0UL << ARM_USART_PARITY_Pos) ///< No Parity (default)
-#define ARM_USART_PARITY_EVEN (1UL << ARM_USART_PARITY_Pos) ///< Even Parity
-#define ARM_USART_PARITY_ODD (2UL << ARM_USART_PARITY_Pos) ///< Odd Parity
-
-/*----- USART Control Codes: Mode Parameters: Stop Bits -----*/
-#define ARM_USART_STOP_BITS_Pos 14
-#define ARM_USART_STOP_BITS_Msk (3UL << ARM_USART_STOP_BITS_Pos)
-#define ARM_USART_STOP_BITS_1 (0UL << ARM_USART_STOP_BITS_Pos) ///< 1 Stop bit (default)
-#define ARM_USART_STOP_BITS_2 (1UL << ARM_USART_STOP_BITS_Pos) ///< 2 Stop bits
-#define ARM_USART_STOP_BITS_1_5 (2UL << ARM_USART_STOP_BITS_Pos) ///< 1.5 Stop bits
-#define ARM_USART_STOP_BITS_0_5 (3UL << ARM_USART_STOP_BITS_Pos) ///< 0.5 Stop bits
-
-/*----- USART Control Codes: Mode Parameters: Flow Control -----*/
-#define ARM_USART_FLOW_CONTROL_Pos 16
-#define ARM_USART_FLOW_CONTROL_Msk (3UL << ARM_USART_FLOW_CONTROL_Pos)
-#define ARM_USART_FLOW_CONTROL_NONE (0UL << ARM_USART_FLOW_CONTROL_Pos) ///< No Flow Control (default)
-#define ARM_USART_FLOW_CONTROL_RTS (1UL << ARM_USART_FLOW_CONTROL_Pos) ///< RTS Flow Control
-#define ARM_USART_FLOW_CONTROL_CTS (2UL << ARM_USART_FLOW_CONTROL_Pos) ///< CTS Flow Control
-#define ARM_USART_FLOW_CONTROL_RTS_CTS (3UL << ARM_USART_FLOW_CONTROL_Pos) ///< RTS/CTS Flow Control
-
-/*----- USART Control Codes: Mode Parameters: Clock Polarity (Synchronous mode) -----*/
-#define ARM_USART_CPOL_Pos 18
-#define ARM_USART_CPOL_Msk (1UL << ARM_USART_CPOL_Pos)
-#define ARM_USART_CPOL0 (0UL << ARM_USART_CPOL_Pos) ///< CPOL = 0 (default)
-#define ARM_USART_CPOL1 (1UL << ARM_USART_CPOL_Pos) ///< CPOL = 1
-
-/*----- USART Control Codes: Mode Parameters: Clock Phase (Synchronous mode) -----*/
-#define ARM_USART_CPHA_Pos 19
-#define ARM_USART_CPHA_Msk (1UL << ARM_USART_CPHA_Pos)
-#define ARM_USART_CPHA0 (0UL << ARM_USART_CPHA_Pos) ///< CPHA = 0 (default)
-#define ARM_USART_CPHA1 (1UL << ARM_USART_CPHA_Pos) ///< CPHA = 1
-
-
-/*----- USART Control Codes: Miscellaneous Controls -----*/
-#define ARM_USART_SET_DEFAULT_TX_VALUE (0x10UL << ARM_USART_CONTROL_Pos) ///< Set default Transmit value (Synchronous Receive only); arg = value
-#define ARM_USART_SET_IRDA_PULSE (0x11UL << ARM_USART_CONTROL_Pos) ///< Set IrDA Pulse in ns; arg: 0=3/16 of bit period
-#define ARM_USART_SET_SMART_CARD_GUARD_TIME (0x12UL << ARM_USART_CONTROL_Pos) ///< Set Smart Card Guard Time; arg = number of bit periods
-#define ARM_USART_SET_SMART_CARD_CLOCK (0x13UL << ARM_USART_CONTROL_Pos) ///< Set Smart Card Clock in Hz; arg: 0=Clock not generated
-#define ARM_USART_CONTROL_SMART_CARD_NACK (0x14UL << ARM_USART_CONTROL_Pos) ///< Smart Card NACK generation; arg: 0=disabled, 1=enabled
-#define ARM_USART_CONTROL_TX (0x15UL << ARM_USART_CONTROL_Pos) ///< Transmitter; arg: 0=disabled, 1=enabled
-#define ARM_USART_CONTROL_RX (0x16UL << ARM_USART_CONTROL_Pos) ///< Receiver; arg: 0=disabled, 1=enabled
-#define ARM_USART_CONTROL_BREAK (0x17UL << ARM_USART_CONTROL_Pos) ///< Continuous Break transmission; arg: 0=disabled, 1=enabled
-#define ARM_USART_ABORT_SEND (0x18UL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Send
-#define ARM_USART_ABORT_RECEIVE (0x19UL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Receive
-#define ARM_USART_ABORT_TRANSFER (0x1AUL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Transfer
-
-
-
-/****** USART specific error codes *****/
-#define ARM_USART_ERROR_MODE (ARM_DRIVER_ERROR_SPECIFIC - 1) ///< Specified Mode not supported
-#define ARM_USART_ERROR_BAUDRATE (ARM_DRIVER_ERROR_SPECIFIC - 2) ///< Specified baudrate not supported
-#define ARM_USART_ERROR_DATA_BITS (ARM_DRIVER_ERROR_SPECIFIC - 3) ///< Specified number of Data bits not supported
-#define ARM_USART_ERROR_PARITY (ARM_DRIVER_ERROR_SPECIFIC - 4) ///< Specified Parity not supported
-#define ARM_USART_ERROR_STOP_BITS (ARM_DRIVER_ERROR_SPECIFIC - 5) ///< Specified number of Stop bits not supported
-#define ARM_USART_ERROR_FLOW_CONTROL (ARM_DRIVER_ERROR_SPECIFIC - 6) ///< Specified Flow Control not supported
-#define ARM_USART_ERROR_CPOL (ARM_DRIVER_ERROR_SPECIFIC - 7) ///< Specified Clock Polarity not supported
-#define ARM_USART_ERROR_CPHA (ARM_DRIVER_ERROR_SPECIFIC - 8) ///< Specified Clock Phase not supported
-
-
-/**
-\brief USART Status
-*/
-typedef volatile struct _ARM_USART_STATUS {
- uint32_t tx_busy : 1; ///< Transmitter busy flag
- uint32_t rx_busy : 1; ///< Receiver busy flag
- uint32_t tx_underflow : 1; ///< Transmit data underflow detected (cleared on start of next send operation)
- uint32_t rx_overflow : 1; ///< Receive data overflow detected (cleared on start of next receive operation)
- uint32_t rx_break : 1; ///< Break detected on receive (cleared on start of next receive operation)
- uint32_t rx_framing_error : 1; ///< Framing error detected on receive (cleared on start of next receive operation)
- uint32_t rx_parity_error : 1; ///< Parity error detected on receive (cleared on start of next receive operation)
- uint32_t reserved : 25;
-} ARM_USART_STATUS;
-
-/**
-\brief USART Modem Control
-*/
-typedef enum _ARM_USART_MODEM_CONTROL {
- ARM_USART_RTS_CLEAR, ///< Deactivate RTS
- ARM_USART_RTS_SET, ///< Activate RTS
- ARM_USART_DTR_CLEAR, ///< Deactivate DTR
- ARM_USART_DTR_SET ///< Activate DTR
-} ARM_USART_MODEM_CONTROL;
-
-/**
-\brief USART Modem Status
-*/
-typedef volatile struct _ARM_USART_MODEM_STATUS {
- uint32_t cts : 1; ///< CTS state: 1=Active, 0=Inactive
- uint32_t dsr : 1; ///< DSR state: 1=Active, 0=Inactive
- uint32_t dcd : 1; ///< DCD state: 1=Active, 0=Inactive
- uint32_t ri : 1; ///< RI state: 1=Active, 0=Inactive
- uint32_t reserved : 28;
-} ARM_USART_MODEM_STATUS;
-
-
-/****** USART Event *****/
-#define ARM_USART_EVENT_SEND_COMPLETE (1UL << 0) ///< Send completed; however USART may still transmit data
-#define ARM_USART_EVENT_RECEIVE_COMPLETE (1UL << 1) ///< Receive completed
-#define ARM_USART_EVENT_TRANSFER_COMPLETE (1UL << 2) ///< Transfer completed
-#define ARM_USART_EVENT_TX_COMPLETE (1UL << 3) ///< Transmit completed (optional)
-#define ARM_USART_EVENT_TX_UNDERFLOW (1UL << 4) ///< Transmit data not available (Synchronous Slave)
-#define ARM_USART_EVENT_RX_OVERFLOW (1UL << 5) ///< Receive data overflow
-#define ARM_USART_EVENT_RX_TIMEOUT (1UL << 6) ///< Receive character timeout (optional)
-#define ARM_USART_EVENT_RX_BREAK (1UL << 7) ///< Break detected on receive
-#define ARM_USART_EVENT_RX_FRAMING_ERROR (1UL << 8) ///< Framing error detected on receive
-#define ARM_USART_EVENT_RX_PARITY_ERROR (1UL << 9) ///< Parity error detected on receive
-#define ARM_USART_EVENT_CTS (1UL << 10) ///< CTS state changed (optional)
-#define ARM_USART_EVENT_DSR (1UL << 11) ///< DSR state changed (optional)
-#define ARM_USART_EVENT_DCD (1UL << 12) ///< DCD state changed (optional)
-#define ARM_USART_EVENT_RI (1UL << 13) ///< RI state changed (optional)
-
-
-// Function documentation
-/**
- \fn ARM_DRIVER_VERSION ARM_USART_GetVersion (void)
- \brief Get driver version.
- \return \ref ARM_DRIVER_VERSION
-
- \fn ARM_USART_CAPABILITIES ARM_USART_GetCapabilities (void)
- \brief Get driver capabilities
- \return \ref ARM_USART_CAPABILITIES
-
- \fn int32_t ARM_USART_Initialize (ARM_USART_SignalEvent_t cb_event)
- \brief Initialize USART Interface.
- \param[in] cb_event Pointer to \ref ARM_USART_SignalEvent
- \return \ref execution_status
-
- \fn int32_t ARM_USART_Uninitialize (void)
- \brief De-initialize USART Interface.
- \return \ref execution_status
-
- \fn int32_t ARM_USART_PowerControl (ARM_POWER_STATE state)
- \brief Control USART Interface Power.
- \param[in] state Power state
- \return \ref execution_status
-
- \fn int32_t ARM_USART_Send (const void *data, uint32_t num)
- \brief Start sending data to USART transmitter.
- \param[in] data Pointer to buffer with data to send to USART transmitter
- \param[in] num Number of data items to send
- \return \ref execution_status
-
- \fn int32_t ARM_USART_Receive (void *data, uint32_t num)
- \brief Start receiving data from USART receiver.
- \param[out] data Pointer to buffer for data to receive from USART receiver
- \param[in] num Number of data items to receive
- \return \ref execution_status
-
- \fn int32_t ARM_USART_Transfer (const void *data_out,
- void *data_in,
- uint32_t num)
- \brief Start sending/receiving data to/from USART transmitter/receiver.
- \param[in] data_out Pointer to buffer with data to send to USART transmitter
- \param[out] data_in Pointer to buffer for data to receive from USART receiver
- \param[in] num Number of data items to transfer
- \return \ref execution_status
-
- \fn uint32_t ARM_USART_GetTxCount (void)
- \brief Get transmitted data count.
- \return number of data items transmitted
-
- \fn uint32_t ARM_USART_GetRxCount (void)
- \brief Get received data count.
- \return number of data items received
-
- \fn int32_t ARM_USART_Control (uint32_t control, uint32_t arg)
- \brief Control USART Interface.
- \param[in] control Operation
- \param[in] arg Argument of operation (optional)
- \return common \ref execution_status and driver specific \ref usart_execution_status
-
- \fn ARM_USART_STATUS ARM_USART_GetStatus (void)
- \brief Get USART status.
- \return USART status \ref ARM_USART_STATUS
-
- \fn int32_t ARM_USART_SetModemControl (ARM_USART_MODEM_CONTROL control)
- \brief Set USART Modem Control line state.
- \param[in] control \ref ARM_USART_MODEM_CONTROL
- \return \ref execution_status
-
- \fn ARM_USART_MODEM_STATUS ARM_USART_GetModemStatus (void)
- \brief Get USART Modem Status lines state.
- \return modem status \ref ARM_USART_MODEM_STATUS
-
- \fn void ARM_USART_SignalEvent (uint32_t event)
- \brief Signal USART Events.
- \param[in] event \ref USART_events notification mask
- \return none
-*/
-
-typedef void (*ARM_USART_SignalEvent_t) (uint32_t event); ///< Pointer to \ref ARM_USART_SignalEvent : Signal USART Event.
-
-
-/**
-\brief USART Device Driver Capabilities.
-*/
-typedef struct _ARM_USART_CAPABILITIES {
- uint32_t asynchronous : 1; ///< supports UART (Asynchronous) mode
- uint32_t synchronous_master : 1; ///< supports Synchronous Master mode
- uint32_t synchronous_slave : 1; ///< supports Synchronous Slave mode
- uint32_t single_wire : 1; ///< supports UART Single-wire mode
- uint32_t irda : 1; ///< supports UART IrDA mode
- uint32_t smart_card : 1; ///< supports UART Smart Card mode
- uint32_t smart_card_clock : 1; ///< Smart Card Clock generator available
- uint32_t flow_control_rts : 1; ///< RTS Flow Control available
- uint32_t flow_control_cts : 1; ///< CTS Flow Control available
- uint32_t event_tx_complete : 1; ///< Transmit completed event: \ref ARM_USART_EVENT_TX_COMPLETE
- uint32_t event_rx_timeout : 1; ///< Signal receive character timeout event: \ref ARM_USART_EVENT_RX_TIMEOUT
- uint32_t rts : 1; ///< RTS Line: 0=not available, 1=available
- uint32_t cts : 1; ///< CTS Line: 0=not available, 1=available
- uint32_t dtr : 1; ///< DTR Line: 0=not available, 1=available
- uint32_t dsr : 1; ///< DSR Line: 0=not available, 1=available
- uint32_t dcd : 1; ///< DCD Line: 0=not available, 1=available
- uint32_t ri : 1; ///< RI Line: 0=not available, 1=available
- uint32_t event_cts : 1; ///< Signal CTS change event: \ref ARM_USART_EVENT_CTS
- uint32_t event_dsr : 1; ///< Signal DSR change event: \ref ARM_USART_EVENT_DSR
- uint32_t event_dcd : 1; ///< Signal DCD change event: \ref ARM_USART_EVENT_DCD
- uint32_t event_ri : 1; ///< Signal RI change event: \ref ARM_USART_EVENT_RI
- uint32_t reserved : 11; ///< Reserved (must be zero)
-} ARM_USART_CAPABILITIES;
-
-
-/**
-\brief Access structure of the USART Driver.
-*/
-typedef struct _ARM_DRIVER_USART {
- ARM_DRIVER_VERSION (*GetVersion) (void); ///< Pointer to \ref ARM_USART_GetVersion : Get driver version.
- ARM_USART_CAPABILITIES (*GetCapabilities) (void); ///< Pointer to \ref ARM_USART_GetCapabilities : Get driver capabilities.
- int32_t (*Initialize) (ARM_USART_SignalEvent_t cb_event); ///< Pointer to \ref ARM_USART_Initialize : Initialize USART Interface.
- int32_t (*Uninitialize) (void); ///< Pointer to \ref ARM_USART_Uninitialize : De-initialize USART Interface.
- int32_t (*PowerControl) (ARM_POWER_STATE state); ///< Pointer to \ref ARM_USART_PowerControl : Control USART Interface Power.
- int32_t (*Send) (const void *data, uint32_t num); ///< Pointer to \ref ARM_USART_Send : Start sending data to USART transmitter.
- int32_t (*Receive) ( void *data, uint32_t num); ///< Pointer to \ref ARM_USART_Receive : Start receiving data from USART receiver.
- int32_t (*Transfer) (const void *data_out,
- void *data_in,
- uint32_t num); ///< Pointer to \ref ARM_USART_Transfer : Start sending/receiving data to/from USART.
- uint32_t (*GetTxCount) (void); ///< Pointer to \ref ARM_USART_GetTxCount : Get transmitted data count.
- uint32_t (*GetRxCount) (void); ///< Pointer to \ref ARM_USART_GetRxCount : Get received data count.
- int32_t (*Control) (uint32_t control, uint32_t arg); ///< Pointer to \ref ARM_USART_Control : Control USART Interface.
- ARM_USART_STATUS (*GetStatus) (void); ///< Pointer to \ref ARM_USART_GetStatus : Get USART status.
- int32_t (*SetModemControl) (ARM_USART_MODEM_CONTROL control); ///< Pointer to \ref ARM_USART_SetModemControl : Set USART Modem Control line state.
- ARM_USART_MODEM_STATUS (*GetModemStatus) (void); ///< Pointer to \ref ARM_USART_GetModemStatus : Get USART Modem Status lines state.
-} const ARM_DRIVER_USART;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* DRIVER_USART_H_ */
diff --git a/platform/ext/target/arm/mps2/an519/CMakeLists.txt b/platform/ext/target/arm/mps2/an519/CMakeLists.txt
index 303832b..04bf20c 100644
--- a/platform/ext/target/arm/mps2/an519/CMakeLists.txt
+++ b/platform/ext/target/arm/mps2/an519/CMakeLists.txt
@@ -146,8 +146,6 @@
${TARGET_PLATFORM_PATH}/tfm_peripherals_def.h
${TARGET_PLATFORM_PATH}/cmsis_driver_config.h
${TARGET_PLATFORM_PATH}/RTE_Device.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
${CMAKE_SOURCE_DIR}/lib/fih/inc/fih.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include)
diff --git a/platform/ext/target/arm/mps2/an521/CMakeLists.txt b/platform/ext/target/arm/mps2/an521/CMakeLists.txt
index a303faf..3f05775 100644
--- a/platform/ext/target/arm/mps2/an521/CMakeLists.txt
+++ b/platform/ext/target/arm/mps2/an521/CMakeLists.txt
@@ -170,8 +170,6 @@
${TARGET_PLATFORM_PATH}/cmsis_driver_config.h
${TARGET_PLATFORM_PATH}/RTE_Device.h
${PLATFORM_DIR}/ext/common/test_interrupt.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
${CMAKE_SOURCE_DIR}/lib/fih/inc/fih.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include)
diff --git a/platform/ext/target/arm/mps3/an524/CMakeLists.txt b/platform/ext/target/arm/mps3/an524/CMakeLists.txt
index 3c208b7..ad2a23c 100644
--- a/platform/ext/target/arm/mps3/an524/CMakeLists.txt
+++ b/platform/ext/target/arm/mps3/an524/CMakeLists.txt
@@ -168,8 +168,6 @@
${TARGET_PLATFORM_PATH}/native_drivers/ppc_sse200_drv.h
${PLATFORM_DIR}/ext/target/arm/drivers/usart/cmsdk/Driver_USART_CMSDK.h
${PLATFORM_DIR}/ext/target/arm/drivers/usart/common/Driver_USART_Common.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
${PLATFORM_DIR}/ext/target/arm/drivers/mpc_sie/mpc_sie_drv.h
${PLATFORM_DIR}/ext/target/arm/drivers/mpu/armv8m/mpu_armv8m_drv.h
diff --git a/platform/ext/target/arm/mps3/corstone300/common/common.cmake b/platform/ext/target/arm/mps3/corstone300/common/common.cmake
index dd16e9f..e9aa573 100644
--- a/platform/ext/target/arm/mps3/corstone300/common/common.cmake
+++ b/platform/ext/target/arm/mps3/corstone300/common/common.cmake
@@ -266,10 +266,6 @@
install(DIRECTORY ${PLATFORM_DIR}/ext/target/arm/drivers
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/target/arm)
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES ${CORSTONE300_COMMON_DIR}/target_cfg.h
${CORSTONE300_COMMON_DIR}/tfm_peripherals_def.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
diff --git a/platform/ext/target/arm/mps3/corstone310/common/common.cmake b/platform/ext/target/arm/mps3/corstone310/common/common.cmake
index bc7bf83..a58390d 100644
--- a/platform/ext/target/arm/mps3/corstone310/common/common.cmake
+++ b/platform/ext/target/arm/mps3/corstone310/common/common.cmake
@@ -266,10 +266,6 @@
install(DIRECTORY ${PLATFORM_DIR}/ext/target/arm/drivers
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/target/arm)
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES ${CORSTONE310_COMMON_DIR}/target_cfg.h
${CORSTONE310_COMMON_DIR}/tfm_peripherals_def.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
diff --git a/platform/ext/target/arm/mps4/corstone315/CMakeLists.txt b/platform/ext/target/arm/mps4/corstone315/CMakeLists.txt
index a6e7337..da5b93b 100644
--- a/platform/ext/target/arm/mps4/corstone315/CMakeLists.txt
+++ b/platform/ext/target/arm/mps4/corstone315/CMakeLists.txt
@@ -489,10 +489,6 @@
install(DIRECTORY ${PLATFORM_DIR}/ext/target/arm/drivers
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/target/arm)
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES target_cfg.h
tfm_peripherals_def.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
diff --git a/platform/ext/target/arm/musca_b1/CMakeLists.txt b/platform/ext/target/arm/musca_b1/CMakeLists.txt
index b6603bb..819bb23 100644
--- a/platform/ext/target/arm/musca_b1/CMakeLists.txt
+++ b/platform/ext/target/arm/musca_b1/CMakeLists.txt
@@ -215,11 +215,6 @@
)
#========================= Files for building NS side platform ================#
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- ${PLATFORM_DIR}/ext/driver/Driver_Flash.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES Device/Source/startup_musca.c
Device/Source/system_core_init.c
Device/Source/device_definition.c
diff --git a/platform/ext/target/arm/musca_s1/CMakeLists.txt b/platform/ext/target/arm/musca_s1/CMakeLists.txt
index 33ad7dc..66d97ff 100644
--- a/platform/ext/target/arm/musca_s1/CMakeLists.txt
+++ b/platform/ext/target/arm/musca_s1/CMakeLists.txt
@@ -175,11 +175,6 @@
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/Device
)
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- ${PLATFORM_DIR}/ext/driver/Driver_Flash.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include)
-
# copy all files from active platform directory
install(DIRECTORY ${TARGET_PLATFORM_PATH}/ns/
DESTINATION ${INSTALL_PLATFORM_NS_DIR})
diff --git a/platform/ext/target/arm/rse/common/CMakeLists.txt b/platform/ext/target/arm/rse/common/CMakeLists.txt
index 86f2e3f..ad719f2 100644
--- a/platform/ext/target/arm/rse/common/CMakeLists.txt
+++ b/platform/ext/target/arm/rse/common/CMakeLists.txt
@@ -732,10 +732,6 @@
#========================= Files for building NS side platform ================#
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES device/source/device_definition.c
$<$<BOOL:${RSE_DEFAULT_CLOCK_CONFIG}>:${CMAKE_CURRENT_SOURCE_DIR}/device/source/rse_clocks.c>
device/source/startup_rse.c
diff --git a/platform/ext/target/armchina/mps3/alcor/common/common.cmake b/platform/ext/target/armchina/mps3/alcor/common/common.cmake
index 7516091..ebdce95 100644
--- a/platform/ext/target/armchina/mps3/alcor/common/common.cmake
+++ b/platform/ext/target/armchina/mps3/alcor/common/common.cmake
@@ -291,10 +291,6 @@
install(DIRECTORY ${PLATFORM_DIR}/ext/target/arm/drivers
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/target/arm)
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES ${PLATFORM_DIR}/include/tfm_plat_defs.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/common/include)
diff --git a/platform/ext/target/nordic_nrf/common/core/CMakeLists.txt b/platform/ext/target/nordic_nrf/common/core/CMakeLists.txt
index 065e2e1..0b3cad1 100644
--- a/platform/ext/target/nordic_nrf/common/core/CMakeLists.txt
+++ b/platform/ext/target/nordic_nrf/common/core/CMakeLists.txt
@@ -217,12 +217,6 @@
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/common/core
)
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- ${PLATFORM_DIR}/ext/driver/Driver_Flash.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
-
install(FILES startup.c
startup_${target}.c
nrfx_glue.c
diff --git a/platform/ext/target/nuvoton/m2351/CMakeLists.txt b/platform/ext/target/nuvoton/m2351/CMakeLists.txt
index c8f25de..06d6464 100644
--- a/platform/ext/target/nuvoton/m2351/CMakeLists.txt
+++ b/platform/ext/target/nuvoton/m2351/CMakeLists.txt
@@ -179,8 +179,6 @@
${PLATFORM_DIR}/ext/target/nuvoton/common/bsp/Include/bpwm_reg.h
${PLATFORM_DIR}/ext/target/nuvoton/common/bsp/Include/crc_reg.h
${PLATFORM_DIR}/ext/target/nuvoton/common/bsp/Include/dac_reg.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
${CMAKE_SOURCE_DIR}/lib/fih/inc/fih.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include)
diff --git a/platform/ext/target/nuvoton/m2354/CMakeLists.txt b/platform/ext/target/nuvoton/m2354/CMakeLists.txt
index 443d71a..6b1e707 100644
--- a/platform/ext/target/nuvoton/m2354/CMakeLists.txt
+++ b/platform/ext/target/nuvoton/m2354/CMakeLists.txt
@@ -181,8 +181,6 @@
${PLATFORM_DIR}/ext/target/nuvoton/common/bsp/Include/bpwm_reg.h
${PLATFORM_DIR}/ext/target/nuvoton/common/bsp/Include/crc_reg.h
${PLATFORM_DIR}/ext/target/nuvoton/common/bsp/Include/dac_reg.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
${CMAKE_SOURCE_DIR}/lib/fih/inc/fih.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include)
diff --git a/platform/ext/target/nxp/lpcxpresso55s69/CMakeLists.txt b/platform/ext/target/nxp/lpcxpresso55s69/CMakeLists.txt
index 4b05fd0..43601f8 100644
--- a/platform/ext/target/nxp/lpcxpresso55s69/CMakeLists.txt
+++ b/platform/ext/target/nxp/lpcxpresso55s69/CMakeLists.txt
@@ -235,11 +235,6 @@
install(DIRECTORY ${NXP_HAL_FILE_PATH}/common/Native_Driver
DESTINATION ${INSTALL_PLATFORM_NS_DIR})
-install(FILES ${PLATFORM_DIR}/ext/driver/Driver_Common.h
- ${PLATFORM_DIR}/ext/driver/Driver_Flash.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- DESTINATION ${INSTALL_PLATFORM_NS_DIR}/ext/driver)
-
install(FILES ${TARGET_PLATFORM_PATH}/project_template/ns/app.h
${TARGET_PLATFORM_PATH}/project_template/ns/board.h
${TARGET_PLATFORM_PATH}/project_template/ns/clock_config.h
diff --git a/platform/ext/target/stm/common/stm32l5xx/CMakeLists.txt b/platform/ext/target/stm/common/stm32l5xx/CMakeLists.txt
index 6e2fa15..4153a12 100644
--- a/platform/ext/target/stm/common/stm32l5xx/CMakeLists.txt
+++ b/platform/ext/target/stm/common/stm32l5xx/CMakeLists.txt
@@ -119,8 +119,6 @@
install(FILES
${PLATFORM_DIR}/ext/common/test_interrupt.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include
)
diff --git a/platform/ext/target/stm/common/stm32u5xx/CMakeLists.txt b/platform/ext/target/stm/common/stm32u5xx/CMakeLists.txt
index 3510e4d..81de9e6 100644
--- a/platform/ext/target/stm/common/stm32u5xx/CMakeLists.txt
+++ b/platform/ext/target/stm/common/stm32u5xx/CMakeLists.txt
@@ -128,8 +128,6 @@
install(FILES
${PLATFORM_DIR}/ext/common/test_interrupt.h
- ${PLATFORM_DIR}/ext/driver/Driver_USART.h
- ${PLATFORM_DIR}/ext/driver/Driver_Common.h
${PLATFORM_DIR}/include/tfm_plat_defs.h
DESTINATION ${INSTALL_PLATFORM_NS_DIR}/include
)
diff --git a/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nand.h b/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nand.h
index d517e41..1c5288b 100644
--- a/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nand.h
+++ b/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nand.h
@@ -18,7 +18,7 @@
#include <stddef.h>
#include <stdint.h>
-#include "driver/Driver_Flash.h"
+#include "Driver_Flash.h"
#ifdef __cplusplus
extern "C" {
diff --git a/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nor.c b/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nor.c
index df58532..e8d9992 100644
--- a/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nor.c
+++ b/secure_fw/partitions/internal_trusted_storage/flash/its_flash_nor.c
@@ -9,7 +9,7 @@
#include "its_flash_nor.h"
#include "flash_fs/its_flash_fs.h"
-#include "driver/Driver_Flash.h"
+#include "Driver_Flash.h"
/* Valid entries for data item width */
static const uint32_t data_width_byte[] = {