Doc: Update Musca-B1 links
Change-Id: I0bcfb693b9e694141ef37f2ffca7a9a7bc300ac5
Signed-off-by: Gabor Abonyi <gabor.abonyi@arm.com>
diff --git a/docs/platform/arm/musca_b1/sse_200/readme.rst b/docs/platform/arm/musca_b1/sse_200/readme.rst
index e81b96e..5052691 100644
--- a/docs/platform/arm/musca_b1/sse_200/readme.rst
+++ b/docs/platform/arm/musca_b1/sse_200/readme.rst
@@ -5,15 +5,15 @@
****************
DAPLink Firmware
****************
-The code on Musca-B1 is running from embededed flash. Make sure that the DAPLink
+The code on Musca-B1 is running from embedded flash. Make sure that the DAPLink
FW for eFlash is downloaded to the board. You can find on the
-`Arm Community page <https://community.arm.com/developer/tools-software/oss-platforms/w/docs/425/musca-b1-firmware-update-qspi-boot-recovery>`__
+`Arm Community page <https://community.arm.com/oss-platforms/w/docs/552/musca-b1-firmware-update-qspi-eflash-boot-recovery>`__
A short description of how to update the DAPLink FW can be found there as well.
.. Note::
Warm reset of eFlash is not supported on Musca_B1. TF-M may not boot after
a warm reset. Further information on the hardware limitation can be
- found on `Arm Community page <https://community.arm.com/developer/tools-software/oss-platforms/w/docs/426/musca-b1-warm-reset-of-eflash>`__.
+ found on `Arm Community page <https://community.arm.com/oss-platforms/w/docs/566/musca-b1-warm-reset-of-eflash>`__.
********************
Platform pin service
@@ -27,4 +27,4 @@
--------------
-*Copyright (c) 2017-2020, Arm Limited. All rights reserved.*
+*Copyright (c) 2017-2022, Arm Limited. All rights reserved.*
diff --git a/docs/platform/platform_introduction.rst b/docs/platform/platform_introduction.rst
index 1e215e9..8ece895 100644
--- a/docs/platform/platform_introduction.rst
+++ b/docs/platform/platform_introduction.rst
@@ -24,7 +24,7 @@
- `Fast model FVP_MPS2_AEMv8M (AN521).
<https://developer.arm.com/products/system-design/fixed-virtual-platforms>`_
- `Musca-B1 test chip board.
- <https://developer.arm.com/products/system-design/development-boards/iot-test-chips-and-boards/musca-b-test-chip-board>`_
+ <https://developer.arm.com/Tools%20and%20Software/Musca-B1%20Test%20Chip%20Board>`_
- `Musca-S1 test chip board.
<https://developer.arm.com/tools-and-software/development-boards/iot-test-chips-and-boards/musca-s1-test-chip-board>`_
- `FPGA image loaded on MPS3 board (AN524).