Boot: Add Python2.7 support for post build steps
These minor changes make Python 3 and Python 2.7 verions supported by
the post build scripts, even integrating them as modules.
Change-Id: I0d7a6d95764db082bbec02b0af01da4cf03fd98d
Signed-off-by: Gabor Kertesz <gabor.kertesz@arm.com>
diff --git a/bl2/ext/mcuboot/scripts/imgtool_lib/image.py b/bl2/ext/mcuboot/scripts/imgtool_lib/image.py
new file mode 100644
index 0000000..67425d4
--- /dev/null
+++ b/bl2/ext/mcuboot/scripts/imgtool_lib/image.py
@@ -0,0 +1,179 @@
+# Copyright 2017 Linaro Limited
+# Copyright (c) 2018, Arm Limited.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""
+Image signing and management.
+"""
+
+from . import version as versmod
+import hashlib
+import struct
+
+IMAGE_MAGIC = 0x96f3b83d
+IMAGE_HEADER_SIZE = 32
+
+# Image header flags.
+IMAGE_F = {
+ 'PIC': 0x0000001,
+ 'NON_BOOTABLE': 0x0000010,
+ 'RAM_LOAD': 0x0000020, }
+TLV_VALUES = {
+ 'KEYHASH': 0x01,
+ 'SHA256' : 0x10,
+ 'RSA2048': 0x20, }
+
+TLV_INFO_SIZE = 4
+TLV_INFO_MAGIC = 0x6907
+
+# Sizes of the image trailer, depending on flash write size.
+trailer_sizes = {
+ write_size: 128 * 3 * write_size + 8 * 2 + 16
+ for write_size in [1, 2, 4, 8]
+}
+
+boot_magic = bytearray([
+ 0x77, 0xc2, 0x95, 0xf3,
+ 0x60, 0xd2, 0xef, 0x7f,
+ 0x35, 0x52, 0x50, 0x0f,
+ 0x2c, 0xb6, 0x79, 0x80, ])
+
+class TLV():
+ def __init__(self):
+ self.buf = bytearray()
+
+ def add(self, kind, payload):
+ """Add a TLV record. Kind should be a string found in TLV_VALUES above."""
+ buf = struct.pack('<BBH', TLV_VALUES[kind], 0, len(payload))
+ self.buf += buf
+ self.buf += payload
+
+ def get(self):
+ header = struct.pack('<HH', TLV_INFO_MAGIC, TLV_INFO_SIZE + len(self.buf))
+ return header + bytes(self.buf)
+
+class Image():
+ @classmethod
+ def load(cls, path, included_header=False, **kwargs):
+ """Load an image from a given file"""
+ with open(path, 'rb') as f:
+ payload = f.read()
+ obj = cls(**kwargs)
+ obj.payload = payload
+
+ # Add the image header if needed.
+ if not included_header and obj.header_size > 0:
+ obj.payload = (b'\000' * obj.header_size) + obj.payload
+
+ obj.check()
+ return obj
+
+ def __init__(self, version, header_size=IMAGE_HEADER_SIZE, pad=0):
+ self.version = version
+ self.header_size = header_size or IMAGE_HEADER_SIZE
+ self.pad = pad
+
+ def __repr__(self):
+ return "<Image version={}, header_size={}, pad={}, payloadlen=0x{:x}>".format(
+ self.version,
+ self.header_size,
+ self.pad,
+ len(self.payload))
+
+ def save(self, path):
+ with open(path, 'wb') as f:
+ f.write(self.payload)
+
+ def check(self):
+ """Perform some sanity checking of the image."""
+ # If there is a header requested, make sure that the image
+ # starts with all zeros.
+ if self.header_size > 0:
+ if any(v != 0 and v != b'\000' for v in self.payload[0:self.header_size]):
+ raise Exception("Padding requested, but image does not start with zeros")
+
+ def sign(self, key, ramLoadAddress):
+ self.add_header(key, ramLoadAddress)
+
+ tlv = TLV()
+
+ sha = hashlib.sha256()
+ sha.update(self.payload)
+ digest = sha.digest()
+
+ tlv.add('SHA256', digest)
+
+ if key is not None:
+ pub = key.get_public_bytes()
+ sha = hashlib.sha256()
+ sha.update(pub)
+ pubbytes = sha.digest()
+ tlv.add('KEYHASH', pubbytes)
+
+ sig = key.sign(self.payload)
+ tlv.add(key.sig_tlv(), sig)
+
+ self.payload += tlv.get()
+
+ def add_header(self, key, ramLoadAddress):
+ """Install the image header.
+
+ The key is needed to know the type of signature, and
+ approximate the size of the signature."""
+
+ flags = 0
+ if ramLoadAddress is not None:
+ # add the load address flag to the header to indicate that an SRAM
+ # load address macro has been defined
+ flags |= IMAGE_F["RAM_LOAD"]
+
+ fmt = ('<' +
+ # type ImageHdr struct {
+ 'I' + # Magic uint32
+ 'I' + # LoadAddr uint32
+ 'H' + # HdrSz uint16
+ 'H' + # Pad1 uint16
+ 'I' + # ImgSz uint32
+ 'I' + # Flags uint32
+ 'BBHI' + # Vers ImageVersion
+ 'I' # Pad2 uint32
+ ) # }
+ assert struct.calcsize(fmt) == IMAGE_HEADER_SIZE
+ header = struct.pack(fmt,
+ IMAGE_MAGIC,
+ 0 if (ramLoadAddress is None) else ramLoadAddress, # LoadAddr
+ self.header_size,
+ 0, # Pad1
+ len(self.payload) - self.header_size, # ImageSz
+ flags, # Flags
+ self.version.major,
+ self.version.minor or 0,
+ self.version.revision or 0,
+ self.version.build or 0,
+ 0) # Pad2
+ self.payload = bytearray(self.payload)
+ self.payload[:len(header)] = header
+
+ def pad_to(self, size, align):
+ """Pad the image to the given size, with the given flash alignment."""
+ tsize = trailer_sizes[align]
+ padding = size - (len(self.payload) + tsize)
+ if padding < 0:
+ msg = "Image size (0x{:x}) + trailer (0x{:x}) exceeds requested size 0x{:x}".format(
+ len(self.payload), tsize, size)
+ raise Exception(msg)
+ pbytes = b'\xff' * padding
+ pbytes += b'\xff' * (tsize - len(boot_magic))
+ pbytes += boot_magic
+ self.payload += pbytes
\ No newline at end of file