diff --git a/erpc/host_example/README.rst b/erpc/host_example/README.rst
index d0e25f1..e516e2b 100644
--- a/erpc/host_example/README.rst
+++ b/erpc/host_example/README.rst
@@ -2,9 +2,9 @@
 eRPC Host
 *********
 
-This host example is only tested for Linux.
+This host example is only tested on Linux machine with Musca-S1 and AN521 FVP.
 
-Example: UART Transportation on Musca_S1
+Example: UART Transportation on Musca-S1
 ========================================
 
 Build instructions on the target
@@ -13,25 +13,38 @@
 .. code-block:: bash
 
     cd <TF-M base folder>
-    cmake -G"Unix Makefiles" -S . -B cmake_build -DTFM_PLATFORM=musca_s1 -DTFM_TOOLCHAIN_FILE=toolchain_GNUARM.cmake -DCMAKE_BUILD_TYPE=Debug -DCONFIG_TFM_ERPC_TEST_FRAMEWORK=ON -DTFM_PARTITION_CRYPTO=ON -DTFM_PARTITION_INTERNAL_TRUSTED_STORAGE=ON ../
+    cmake -G"Unix Makefiles" -S . -B cmake_build -DTFM_PLATFORM=musca_s1 \
+    -DCONFIG_TFM_ERPC_TEST_FRAMEWORK=ON -DTFM_PARTITION_CRYPTO=ON -DTFM_PARTITION_INTERNAL_TRUSTED_STORAGE=ON \
+    -DTFM_SPM_LOG_LEVEL=TFM_SPM_LOG_LEVEL_SILENCE -DTFM_PARTITION_LOG_LEVEL=TFM_PARTITION_LOG_LEVEL_SILENCE \
+    -DMCUBOOT_LOG_LEVEL=OFF ../
     cmake --build cmake_build/ -- install -j32
 
+.. Note::
+    All the logs must be disabled to avoid interferences between logs and eRPC transportation as
+    they share the same UART device.
+    Otherwise, the RPC test framework may not work.
+    This might only happen on platforms using the same UART devices.
+
 Build instructions on the host
 ------------------------------
 
 .. code-block:: bash
 
     cd <TF-M tests base folder>/erpc/host_example
-    cmake -S . -B build -G "Unix Makefiles" -DTFM_INSTALL_PATH=<TF-M install folder> -DERPC_REPO_PATH=<eRPC base folder> -DERPC_TRANSPORT=UART -DPORT_NAME="/dev/ttyACM0"
+    cmake -S . -B build -G "Unix Makefiles" -DTFM_INSTALL_PATH=<TF-M install folder> -DERPC_REPO_PATH=<eRPC base folder> \
+    -DERPC_TRANSPORT=UART -DPORT_NAME="/dev/ttyACM0"
     cmake --build  build/
 
-Run instructions on the host
-----------------------------
+Run instructions
+----------------
 
-.. code-block:: bash
+- Flash the image to the device and boot it up.
+- Start the host example
 
-    cd <TF-M tests base folder>/erpc/host_example
-    ./build/erpc_main
+  .. code-block:: bash
+
+      cd <TF-M tests base folder>/erpc/host_example
+      ./build/erpc_main
 
 Example: TCP Transportation on AN521 FVP
 ========================================
@@ -42,7 +55,8 @@
 .. code-block:: bash
 
     cd <TF-M base folder>
-    cmake -G"Unix Makefiles" -S . -B cmake_build -DTFM_PLATFORM=an521 -DTFM_TOOLCHAIN_FILE=toolchain_GNUARM.cmake -DCMAKE_BUILD_TYPE=Debug -DCONFIG_TFM_ERPC_TEST_FRAMEWORK=ON -DTFM_PARTITION_CRYPTO=ON -DTFM_PARTITION_INTERNAL_TRUSTED_STORAGE=ON ../
+    cmake -G"Unix Makefiles" -S . -B cmake_build -DTFM_PLATFORM=an521 \
+    -DCONFIG_TFM_ERPC_TEST_FRAMEWORK=ON -DTFM_PARTITION_CRYPTO=ON -DTFM_PARTITION_INTERNAL_TRUSTED_STORAGE=ON ../
     cmake --build cmake_build/ -- install -j32
 
 Build instructions on the host
@@ -51,11 +65,12 @@
 .. code-block:: bash
 
     cd <TF-M tests base folder>/erpc/host_example
-    cmake -S . -B build -G "Unix Makefiles" -DTFM_INSTALL_PATH=<TF-M install folder> -DERPC_REPO_PATH=<eRPC base folder> -DERPC_TRANSPORT=TCP -DERPC_HOST="0.0.0.0" -DERPC_PORT=5001
+    cmake -S . -B build -G "Unix Makefiles" -DTFM_INSTALL_PATH=<TF-M install folder> -DERPC_REPO_PATH=<eRPC base folder> \
+    -DERPC_TRANSPORT=TCP -DERPC_HOST="0.0.0.0" -DERPC_PORT=5001
     cmake --build  build/
 
-Run instructions on the host
-----------------------------
+Run instructions
+----------------
 
 Start the AN521 FVP:
 
@@ -82,6 +97,8 @@
     --data cpu0=<DATA>@0x10080000 \
     -M 1
 
+Start the host example
+
 .. code-block:: bash
 
     cd <TF-M tests base folder>/erpc/host_example