diff --git a/plat/arm/board/fvp/fvp_bl31_setup.c b/plat/arm/board/fvp/fvp_bl31_setup.c
index 2ee3ba5..f16d6f0 100644
--- a/plat/arm/board/fvp/fvp_bl31_setup.c
+++ b/plat/arm/board/fvp/fvp_bl31_setup.c
@@ -31,9 +31,13 @@
 #include <plat_arm.h>
 #include "fvp_private.h"
 
-
+#if LOAD_IMAGE_V2
+void bl31_early_platform_setup(void *from_bl2,
+				void *plat_params_from_bl2)
+#else
 void bl31_early_platform_setup(bl31_params_t *from_bl2,
 				void *plat_params_from_bl2)
+#endif
 {
 	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
 
diff --git a/plat/arm/board/juno/include/platform_def.h b/plat/arm/board/juno/include/platform_def.h
index c53e938..691e2f7 100644
--- a/plat/arm/board/juno/include/platform_def.h
+++ b/plat/arm/board/juno/include/platform_def.h
@@ -185,6 +185,12 @@
 #define PLAT_CSS_PRIMARY_CPU_BIT_WIDTH		4
 
 /*
+ * PLAT_CSS_MAX_SCP_BL2_SIZE is calculated using the current
+ * SCP_BL2 size plus a little space for growth.
+ */
+#define PLAT_CSS_MAX_SCP_BL2_SIZE	0x1D000
+
+/*
  * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
  * terminology. On a GICv2 system or mode, the lists will be merged and treated
  * as Group 0 interrupts.
diff --git a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
new file mode 100644
index 0000000..64315f7
--- /dev/null
+++ b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+#include <platform_def.h>
+
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+	/* Fill SCP_BL2 related information if it exists */
+    {
+	    .image_id = SCP_BL2_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = SCP_BL2_BASE,
+	    .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+    },
+#endif /* SCP_BL2_BASE */
+
+#ifdef EL3_PAYLOAD_BASE
+	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
+    {
+	    .image_id = BL31_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t,
+		    SECURE | EXECUTABLE | EP_FIRST_EXE),
+	    .ep_info.pc = EL3_PAYLOAD_BASE,
+	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+		    DISABLE_ALL_EXCEPTIONS),
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t,
+		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+    },
+
+#else /* EL3_PAYLOAD_BASE */
+
+	/* Fill BL31 related information */
+    {
+	    .image_id = BL31_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t,
+		    SECURE | EXECUTABLE | EP_FIRST_EXE),
+	    .ep_info.pc = BL31_BASE,
+	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+		    DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+	    .ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL,
+#endif
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+	    .image_info.image_base = BL31_BASE,
+	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+# ifdef BL32_BASE
+	    .next_handoff_image_id = BL32_IMAGE_ID,
+# else
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+# endif
+    },
+
+# ifdef BL32_BASE
+	/* Fill BL32 related information */
+    {
+	    .image_id = BL32_IMAGE_ID,
+
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+	    .ep_info.pc = BL32_BASE,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = BL32_BASE,
+	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+	    .next_handoff_image_id = BL33_IMAGE_ID,
+    },
+# endif /* BL32_BASE */
+
+	/* Fill BL33 related information */
+    {
+	    .image_id = BL33_IMAGE_ID,
+	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+# ifdef PRELOADED_BL33_BASE
+	    .ep_info.pc = PRELOADED_BL33_BASE,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+# else
+	    .ep_info.pc = PLAT_ARM_NS_IMAGE_OFFSET,
+
+	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+		    VERSION_2, image_info_t, 0),
+	    .image_info.image_base = PLAT_ARM_NS_IMAGE_OFFSET,
+	    .image_info.image_max_size = ARM_DRAM1_SIZE,
+# endif /* PRELOADED_BL33_BASE */
+
+	    .next_handoff_image_id = INVALID_IMAGE_ID,
+    }
+#endif /* EL3_PAYLOAD_BASE */
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index c94f0cd..6782f88 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -73,7 +73,6 @@
  ******************************************************************************/
 void arm_bl1_early_platform_setup(void)
 {
-	const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE;
 
 #if !ARM_DISABLE_TRUSTED_WDOG
 	/* Enable watchdog */
@@ -88,13 +87,15 @@
 	bl1_tzram_layout.total_base = ARM_BL_RAM_BASE;
 	bl1_tzram_layout.total_size = ARM_BL_RAM_SIZE;
 
+#if !LOAD_IMAGE_V2
 	/* Calculate how much RAM BL1 is using and how much remains free */
 	bl1_tzram_layout.free_base = ARM_BL_RAM_BASE;
 	bl1_tzram_layout.free_size = ARM_BL_RAM_SIZE;
 	reserve_mem(&bl1_tzram_layout.free_base,
 		    &bl1_tzram_layout.free_size,
 		    BL1_RAM_BASE,
-		    bl1_size);
+		    BL1_RAM_LIMIT - BL1_RAM_BASE);
+#endif /* LOAD_IMAGE_V2 */
 }
 
 void bl1_early_platform_setup(void)
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index b6afaa7..a2ae11a 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -30,10 +30,13 @@
 
 #include <arch_helpers.h>
 #include <arm_def.h>
+#include <assert.h>
 #include <bl_common.h>
 #include <console.h>
-#include <platform_def.h>
+#include <debug.h>
+#include <desc_image_load.h>
 #include <plat_arm.h>
+#include <platform_def.h>
 #include <string.h>
 
 #if USE_COHERENT_MEM
@@ -51,6 +54,17 @@
 /* Data structure which holds the extents of the trusted SRAM for BL2 */
 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
 
+/* Weak definitions may be overridden in specific ARM standard platform */
+#pragma weak bl2_early_platform_setup
+#pragma weak bl2_platform_setup
+#pragma weak bl2_plat_arch_setup
+#pragma weak bl2_plat_sec_mem_layout
+
+#if LOAD_IMAGE_V2
+
+#pragma weak bl2_plat_handle_post_image_load
+
+#else /* LOAD_IMAGE_V2 */
 
 /*******************************************************************************
  * This structure represents the superset of information that is passed to
@@ -72,10 +86,6 @@
 
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak bl2_early_platform_setup
-#pragma weak bl2_platform_setup
-#pragma weak bl2_plat_arch_setup
-#pragma weak bl2_plat_sec_mem_layout
 #pragma weak bl2_plat_get_bl31_params
 #pragma weak bl2_plat_get_bl31_ep_info
 #pragma weak bl2_plat_flush_bl31_params
@@ -106,7 +116,7 @@
 {
 	return &bl2_tzram_layout;
 }
-#endif
+#endif /* ARM_BL31_IN_DRAM */
 
 /*******************************************************************************
  * This function assigns a pointer to the memory that the platform has kept
@@ -180,6 +190,7 @@
 
 	return &bl31_params_mem.bl31_ep_info;
 }
+#endif /* LOAD_IMAGE_V2 */
 
 /*******************************************************************************
  * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
@@ -243,6 +254,44 @@
 	arm_bl2_plat_arch_setup();
 }
 
+#if LOAD_IMAGE_V2
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	int err = 0;
+	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+	assert(bl_mem_params);
+
+	switch (image_id) {
+	case BL32_IMAGE_ID:
+		bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl32_entry();
+		break;
+
+	case BL33_IMAGE_ID:
+		/* BL33 expects to receive the primary CPU MPID (through r0) */
+		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+		bl_mem_params->ep_info.spsr = arm_get_spsr_for_bl33_entry();
+		break;
+
+#ifdef SCP_BL2_BASE
+	case SCP_BL2_IMAGE_ID:
+		/* The subsequent handling of SCP_BL2 is platform specific */
+		err = plat_arm_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+		if (err) {
+			WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+		}
+		break;
+#endif
+	}
+
+	return err;
+}
+
+#else /* LOAD_IMAGE_V2 */
+
 /*******************************************************************************
  * Populate the extents of memory available for loading SCP_BL2 (if used),
  * i.e. anywhere in trusted RAM as long as it doesn't overwrite BL2.
@@ -321,3 +370,5 @@
 	bl33_meminfo->free_base = ARM_NS_DRAM1_BASE;
 	bl33_meminfo->free_size = ARM_NS_DRAM1_SIZE;
 }
+
+#endif /* LOAD_IMAGE_V2 */
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c
index 4ed2477..bc1ec11 100644
--- a/plat/arm/common/arm_bl31_setup.c
+++ b/plat/arm/common/arm_bl31_setup.c
@@ -34,6 +34,7 @@
 #include <assert.h>
 #include <bl_common.h>
 #include <console.h>
+#include <debug.h>
 #include <mmio.h>
 #include <plat_arm.h>
 #include <platform.h>
@@ -98,8 +99,13 @@
  * while creating page tables. BL2 has flushed this information to memory, so
  * we are guaranteed to pick up good data.
  ******************************************************************************/
+#if LOAD_IMAGE_V2
+void arm_bl31_early_platform_setup(void *from_bl2,
+				void *plat_params_from_bl2)
+#else
 void arm_bl31_early_platform_setup(bl31_params_t *from_bl2,
 				void *plat_params_from_bl2)
+#endif
 {
 	/* Initialize the console to provide early debug support */
 	console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
@@ -135,13 +141,8 @@
 	bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry();
 	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
 
-#else
-	/*
-	 * Check params passed from BL2 should not be NULL,
-	 */
-	assert(from_bl2 != NULL);
-	assert(from_bl2->h.type == PARAM_BL31);
-	assert(from_bl2->h.version >= VERSION_1);
+#else /* RESET_TO_BL31 */
+
 	/*
 	 * In debug builds, we pass a special value in 'plat_params_from_bl2'
 	 * to verify platform parameters from BL2 to BL31.
@@ -150,6 +151,43 @@
 	assert(((unsigned long long)plat_params_from_bl2) ==
 		ARM_BL31_PLAT_PARAM_VAL);
 
+# if LOAD_IMAGE_V2
+	/*
+	 * Check params passed from BL2 should not be NULL,
+	 */
+	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+	assert(params_from_bl2 != NULL);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+	/*
+	 * Copy BL33 and BL32 (if present), entry point information.
+	 * They are stored in Secure RAM, in BL2's address space.
+	 */
+	while (bl_params) {
+		if (bl_params->image_id == BL32_IMAGE_ID)
+			bl32_image_ep_info = *bl_params->ep_info;
+
+		if (bl_params->image_id == BL33_IMAGE_ID)
+			bl33_image_ep_info = *bl_params->ep_info;
+
+		bl_params = bl_params->next_params_info;
+	}
+
+	if (bl33_image_ep_info.pc == 0)
+		panic();
+
+# else /* LOAD_IMAGE_V2 */
+
+	/*
+	 * Check params passed from BL2 should not be NULL,
+	 */
+	assert(from_bl2 != NULL);
+	assert(from_bl2->h.type == PARAM_BL31);
+	assert(from_bl2->h.version >= VERSION_1);
+
 	/*
 	 * Copy BL32 (if populated by BL2) and BL33 entry point information.
 	 * They are stored in Secure RAM, in BL2's address space.
@@ -157,11 +195,18 @@
 	if (from_bl2->bl32_ep_info)
 		bl32_image_ep_info = *from_bl2->bl32_ep_info;
 	bl33_image_ep_info = *from_bl2->bl33_ep_info;
-#endif
+
+# endif /* LOAD_IMAGE_V2 */
+#endif /* RESET_TO_BL31 */
 }
 
+#if LOAD_IMAGE_V2
+void bl31_early_platform_setup(void *from_bl2,
+				void *plat_params_from_bl2)
+#else
 void bl31_early_platform_setup(bl31_params_t *from_bl2,
 				void *plat_params_from_bl2)
+#endif
 {
 	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
 
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index 0b961ea7..51bd60c 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -129,6 +129,11 @@
 				plat/arm/common/arm_bl2_setup.c			\
 				plat/arm/common/arm_io_storage.c		\
 				plat/common/aarch64/platform_up_stack.S
+ifeq (${LOAD_IMAGE_V2},1)
+BL2_SOURCES		+=	plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c\
+				plat/arm/common/arm_image_load.c		\
+				common/desc_image_load.c
+endif
 
 BL2U_SOURCES		+=	plat/arm/common/arm_bl2u_setup.c		\
 				plat/common/aarch64/platform_up_stack.S
diff --git a/plat/arm/common/arm_image_load.c b/plat/arm/common/arm_image_load.c
new file mode 100644
index 0000000..cb6db77
--- /dev/null
+++ b/plat/arm/common/arm_image_load.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arm_def.h>
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+
+
+#pragma weak plat_flush_next_bl_params
+#pragma weak plat_get_bl_image_load_info
+#pragma weak plat_get_next_bl_params
+
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+	flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+	return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+	return get_next_bl_params_from_mem_params_desc();
+}
diff --git a/plat/arm/css/common/css_bl2_setup.c b/plat/arm/css/common/css_bl2_setup.c
index 15db8d1..11ca342 100644
--- a/plat/arm/css/common/css_bl2_setup.c
+++ b/plat/arm/css/common/css_bl2_setup.c
@@ -37,13 +37,21 @@
 #include "css_scp_bootloader.h"
 
 /* Weak definition may be overridden in specific CSS based platform */
+#if LOAD_IMAGE_V2
+#pragma weak plat_arm_bl2_handle_scp_bl2
+#else
 #pragma weak bl2_plat_handle_scp_bl2
+#endif
 
 /*******************************************************************************
  * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
  * Return 0 on success, -1 otherwise.
  ******************************************************************************/
+#if LOAD_IMAGE_V2
+int plat_arm_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+#else
 int bl2_plat_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+#endif
 {
 	int ret;