Synchronize files with TF-A repository
Change-Id: Ieb56d0639efd29c2695751b2b36cc98ce2c90dab
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h b/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
index 37f3b53..4afd1c8 100644
--- a/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
+++ b/include/lib/xlat_tables/aarch32/xlat_tables_aarch32.h
@@ -63,8 +63,7 @@
* is 1.
*
* Note that this macro assumes that the given virtual address space size is
- * valid. Therefore, the caller is expected to check it is the case using the
- * CHECK_VIRT_ADDR_SPACE_SIZE() macro first.
+ * valid.
*/
#define GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_sz) \
(((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT)) ? \
diff --git a/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
index 91ca8e4..8c29d00 100644
--- a/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
+++ b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h
@@ -43,14 +43,22 @@
* state.
*
* TCR.TxSZ is calculated as 64 minus the width of said address space.
- * The value of TCR.TxSZ must be in the range 16 to 39 [1], which means that
- * the virtual address space width must be in the range 48 to 25 bits.
+ * The value of TCR.TxSZ must be in the range 16 to 39 [1] or 48 [2],
+ * depending on Small Translation Table Support which means that
+ * the virtual address space width must be in the range 48 to 25 or 16 bits.
*
* [1] See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
* information:
* Page 1730: 'Input address size', 'For all translation stages'.
+ * [2] See section 12.2.55 in the ARMv8-A Architecture Reference Manual
+ * (DDI 0487D.a)
*/
+/* Maximum value of TCR_ELx.T(0,1)SZ is 39 */
#define MIN_VIRT_ADDR_SPACE_SIZE (ULL(1) << (U(64) - TCR_TxSZ_MAX))
+
+/* Maximum value of TCR_ELx.T(0,1)SZ is 48 */
+#define MIN_VIRT_ADDR_SPACE_SIZE_TTST \
+ (ULL(1) << (U(64) - TCR_TxSZ_MAX_TTST))
#define MAX_VIRT_ADDR_SPACE_SIZE (ULL(1) << (U(64) - TCR_TxSZ_MIN))
/*
@@ -58,9 +66,13 @@
* virtual address space size. For a 4 KB page size,
* - level 0 supports virtual address spaces of widths 48 to 40 bits;
* - level 1 from 39 to 31;
- * - level 2 from 30 to 25.
+ * - level 2 from 30 to 22.
+ * - level 3 from 21 to 16.
*
- * Wider or narrower address spaces are not supported. As a result, level 3
+ * Small Translation Table (Armv8.4-TTST) support allows the starting level
+ * of the translation table from 3 for 4KB granularity. See section 12.2.55 in
+ * the ARMv8-A Architecture Reference Manual (DDI 0487D.a). In Armv8.3 and below
+ * wider or narrower address spaces are not supported. As a result, level 3
* cannot be used as initial lookup level with 4 KB granularity. See section
* D4.2.5 in the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more
* information.
@@ -71,13 +83,14 @@
* is 1.
*
* Note that this macro assumes that the given virtual address space size is
- * valid. Therefore, the caller is expected to check it is the case using the
- * CHECK_VIRT_ADDR_SPACE_SIZE() macro first.
+ * valid.
*/
#define GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_sz) \
(((_virt_addr_space_sz) > (ULL(1) << L0_XLAT_ADDRESS_SHIFT)) \
? 0U \
- : (((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT)) \
- ? 1U : 2U))
+ : (((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT)) \
+ ? 1U \
+ : (((_virt_addr_space_sz) > (ULL(1) << L2_XLAT_ADDRESS_SHIFT)) \
+ ? 2U : 3U)))
#endif /* XLAT_TABLES_AARCH64_H */
diff --git a/include/lib/xlat_tables/xlat_tables_arch.h b/include/lib/xlat_tables/xlat_tables_arch.h
index 251b020..7237534 100644
--- a/include/lib/xlat_tables/xlat_tables_arch.h
+++ b/include/lib/xlat_tables/xlat_tables_arch.h
@@ -14,18 +14,6 @@
#endif
/*
- * Evaluates to 1 if the given virtual address space size is valid, or 0 if it's
- * not.
- *
- * A valid size is one that is a power of 2 and is within the architectural
- * limits. Not that these limits are different for AArch32 and AArch64.
- */
-#define CHECK_VIRT_ADDR_SPACE_SIZE(size) \
- (((unsigned long long)(size) >= MIN_VIRT_ADDR_SPACE_SIZE) && \
- ((unsigned long long)(size) <= MAX_VIRT_ADDR_SPACE_SIZE) && \
- IS_POWER_OF_TWO(size))
-
-/*
* Evaluates to 1 if the given physical address space size is a power of 2,
* or 0 if it's not.
*/
diff --git a/include/lib/xlat_tables/xlat_tables_v2.h b/include/lib/xlat_tables/xlat_tables_v2.h
index fa2f9f5..0fe388b 100644
--- a/include/lib/xlat_tables/xlat_tables_v2.h
+++ b/include/lib/xlat_tables/xlat_tables_v2.h
@@ -209,6 +209,17 @@
void init_xlat_tables_ctx(xlat_ctx_t *ctx);
/*
+ * Fill all fields of a dynamic translation tables context. It must be done
+ * either statically with REGISTER_XLAT_CONTEXT() or at runtime with this
+ * function.
+ */
+void xlat_setup_dynamic_ctx(xlat_ctx_t *ctx, unsigned long long pa_max,
+ uintptr_t va_max, struct mmap_region *mmap,
+ unsigned int mmap_num, uint64_t **tables,
+ unsigned int tables_num, uint64_t *base_table,
+ int xlat_regime, int *mapped_regions);
+
+/*
* Add a static region with defined base PA and base VA. This function can only
* be used before initializing the translation tables. The region cannot be
* removed afterwards.
diff --git a/include/lib/xlat_tables/xlat_tables_v2_helpers.h b/include/lib/xlat_tables/xlat_tables_v2_helpers.h
index fa89958..aa2bd66 100644
--- a/include/lib/xlat_tables/xlat_tables_v2_helpers.h
+++ b/include/lib/xlat_tables/xlat_tables_v2_helpers.h
@@ -123,9 +123,6 @@
#define REGISTER_XLAT_CONTEXT_FULL_SPEC(_ctx_name, _mmap_count, \
_xlat_tables_count, _virt_addr_space_size, \
_phy_addr_space_size, _xlat_regime, _section_name)\
- CASSERT(CHECK_VIRT_ADDR_SPACE_SIZE(_virt_addr_space_size), \
- assert_invalid_virtual_addr_space_size_for_##_ctx_name);\
- \
CASSERT(CHECK_PHY_ADDR_SPACE_SIZE(_phy_addr_space_size), \
assert_invalid_physical_addr_space_sizefor_##_ctx_name);\
\