diff --git a/plat/xilinx/common/timer/timers.c b/plat/xilinx/common/timer/timers.c
new file mode 100644
index 0000000..a6e1afa
--- /dev/null
+++ b/plat/xilinx/common/timer/timers.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stddef.h>
+
+#include <debug.h>
+#include <mmio.h>
+#include <platform.h>
+#include <tftf_lib.h>
+#include <timer.h>
+#include <utils_def.h>
+
+#define TTC_OFFSET_TMR_0		U(0)
+#define TTC_OFFSET_TMR_1		U(4)
+#define TTC_OFFSET_TMR_2		U(8)
+
+#define TTC_CLK_CNTRL_OFFSET		U(0x00) /* Clock Control Reg, RW */
+#define TTC_CNT_CNTRL_OFFSET		U(0x0C) /* Counter Control Reg, RW */
+#define TTC_COUNT_VAL_OFFSET		U(0x18) /* Counter Value Reg, RO */
+#define TTC_INTR_VAL_OFFSET		U(0x24) /* Interval Count Reg, RW */
+#define TTC_ISR_OFFSET			U(0x54) /* Interrupt Status Reg, RO */
+#define TTC_IER_OFFSET			U(0x60) /* Interrupt Enable Reg, RW */
+
+#define TTC_CNT_CNTRL_DISABLE_MASK	BIT(0)
+
+#define TTC_CLK_SEL_OFFSET		U(0x360)
+#define TTC_CLK_SEL_MASK		GENMASK(1, 0)
+
+#define TTC_CLK_SEL_PS_REF		BIT(0)
+#define TTC_CLK_SEL_RPU_REF		BIT(4)
+
+#define RET_SUCCESS			U(0)
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
+ * work across most input frequency, but it may need to be more dynamic
+ */
+#define PRESCALE_EXPONENT		U(16) /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
+#define PRESCALE			U(65536) /* The exponent must match this */
+#define CLK_CNTRL_PRESCALE		((PRESCALE_EXPONENT - 1) << 1U)
+#define CLK_CNTRL_PRESCALE_EN		BIT(0)
+#define CNT_CNTRL_RESET			BIT(4)
+
+/* Resolution obtained as per the input clock and Prescale value
+ * Clock Selected : PS_REF_CLK
+ * Clock Value : 33333333Hz (33.33MHz)
+ * Prescalar for TTC, N : 15 (highest)
+ * Prescalar Applied 2^(N+1) : 65536
+ * Input clock : (PS_REF_CLK)/Prescalar) : 508.6263Hz
+ * Resolution (1/InputClock) : 1.966miliseconds ~2ms
+ */
+const unsigned long INTERVAL = 2;
+
+static void timer_write_32(uint32_t offset, uint32_t val)
+{
+	/* actual write */
+	mmio_write_32(SYS_CNT_BASE1 + offset, val);
+}
+
+static uint32_t timer_read_32(uint32_t offset)
+{
+	/* actual read */
+	return mmio_read_32(SYS_CNT_BASE1 + offset);
+}
+
+static int cancel_timer(void)
+{
+	/* Disable Interrupt */
+	timer_write_32(TTC_IER_OFFSET, 0);
+
+	/* Disable Counter */
+	timer_write_32(TTC_CLK_CNTRL_OFFSET, !CLK_CNTRL_PRESCALE_EN);
+	timer_write_32(TTC_CNT_CNTRL_OFFSET, !CLK_CNTRL_PRESCALE_EN);
+
+	return RET_SUCCESS;
+}
+
+static void clocksetup(void)
+{
+	timer_write_32(TTC_OFFSET_TMR_0 + TTC_CLK_CNTRL_OFFSET, 0x0);
+
+	mmio_write_32(LPD_IOU_SLCR + TTC_CLK_SEL_OFFSET, TTC_CLK_SEL_PS_REF);
+
+	VERBOSE("%s TTC_CLK_SEL = 0x%x\n", __func__,
+			mmio_read_32(LPD_IOU_SLCR + TTC_CLK_SEL_OFFSET));
+}
+
+static void setcounts(unsigned long time_out_ms)
+{
+	unsigned long intrvl = (time_out_ms / INTERVAL) + (time_out_ms % INTERVAL);
+
+	timer_write_32(TTC_INTR_VAL_OFFSET, intrvl);
+}
+
+static int program_timer(unsigned long time_out_ms)
+{
+	uint32_t reg;
+
+	/* Disable and program the counter */
+	reg = timer_read_32(TTC_CNT_CNTRL_OFFSET);
+	reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+	timer_write_32(TTC_CNT_CNTRL_OFFSET, reg);
+
+	setcounts(time_out_ms);
+
+	/* Enable the interrupt */
+	timer_write_32(TTC_IER_OFFSET, 0x01);
+
+	/* Enable the counter */
+	reg |= CNT_CNTRL_RESET;
+	reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+	timer_write_32(TTC_CNT_CNTRL_OFFSET, reg);
+
+	return RET_SUCCESS;
+}
+
+static int handler_timer(void)
+{
+	uint32_t status;
+
+	/* Disable the interrupts */
+	timer_write_32(TTC_IER_OFFSET, 0x00);
+
+	status = timer_read_32(TTC_ISR_OFFSET);
+	if (status & 0x1)
+		INFO("Timer Event! %x\n", status);
+	else
+		ERROR("Its not a Timer Event %d\n", status);
+
+	return RET_SUCCESS;
+}
+
+static const plat_timer_t timers = {
+	.program = program_timer,
+	.cancel = cancel_timer,
+	.handler = handler_timer,
+	.timer_step_value = INTERVAL,
+	.timer_irq = TTC_TIMER_IRQ
+};
+
+int plat_initialise_timer_ops(const plat_timer_t **timer_ops)
+{
+	assert(timer_ops != NULL);
+
+	/* Disable all Interrupts on the TTC */
+	timer_write_32(TTC_OFFSET_TMR_0 + TTC_IER_OFFSET, 0);
+	timer_write_32(TTC_OFFSET_TMR_1 + TTC_IER_OFFSET, 0);
+	timer_write_32(TTC_OFFSET_TMR_2 + TTC_IER_OFFSET, 0);
+
+	clocksetup();
+
+	/*
+	 * Setup the clock event timer to be an interval timer which
+	 * is prescaled by 32 using the interval interrupt. Leave it
+	 * disabled for now.
+	 */
+	timer_write_32(TTC_OFFSET_TMR_0 + TTC_CNT_CNTRL_OFFSET, 0x23);
+	timer_write_32(TTC_OFFSET_TMR_0 + TTC_CLK_CNTRL_OFFSET,
+		       CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN);
+	timer_write_32(TTC_OFFSET_TMR_0 + TTC_IER_OFFSET, 0x01);
+
+	*timer_ops = &timers;
+
+	return RET_SUCCESS;
+}