aboutsummaryrefslogtreecommitdiff
path: root/toolchain_ARMCLANG.cmake
diff options
context:
space:
mode:
authorRaef Coles <raef.coles@arm.com>2020-07-10 09:40:35 +0100
committerTamas Ban <tamas.ban@arm.com>2020-09-24 12:49:54 +0000
commit9ec67e6f3f9d09fa21323b49e3b65537fac95144 (patch)
treef9fb65c16c226f6fdbc45be6d3899eaaa29e8cad /toolchain_ARMCLANG.cmake
parent01da63fbc646e1215579097168378e642af14842 (diff)
downloadtrusted-firmware-m-9ec67e6f3f9d09fa21323b49e3b65537fac95144.tar.gz
Build: Convert buildsystem base to modern cmake
Alters root cmake file and configuration files, and adds cmake toolchain files. WARNING: This change will not build in isolation, it requires _all_ other cmake changes to successfully build. It is split out only for clarity of changes. Signed-off-by: Raef Coles <raef.coles@arm.com> Change-Id: Iecc914859a5b1d497176ec82f0b6c22764c7b556
Diffstat (limited to 'toolchain_ARMCLANG.cmake')
-rw-r--r--toolchain_ARMCLANG.cmake253
1 files changed, 253 insertions, 0 deletions
diff --git a/toolchain_ARMCLANG.cmake b/toolchain_ARMCLANG.cmake
new file mode 100644
index 0000000000..032abb2da4
--- /dev/null
+++ b/toolchain_ARMCLANG.cmake
@@ -0,0 +1,253 @@
+#-------------------------------------------------------------------------------
+# Copyright (c) 2020, Arm Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#-------------------------------------------------------------------------------
+
+cmake_minimum_required(VERSION 3.15)
+
+SET(CMAKE_SYSTEM_NAME Generic)
+# This setting is overridden in ${TFM_PLATFORM}/preload.cmake. It can be set to
+# any value here.
+set(CMAKE_SYSTEM_PROCESSOR cortex-m23)
+
+set(CMAKE_C_COMPILER armclang)
+set(CMAKE_ASM_COMPILER armclang)
+
+set(LINKER_VENEER_OUTPUT_FLAG --import_cmse_lib_out=)
+set(COMPILER_CMSE_FLAG -mcmse)
+
+# This variable name is a bit of a misnomer. The file it is set to is included
+# at a particular step in the compiler initialisation. It is used here to
+# configure the extensions for object files. Despite the name, it also works
+# with the Ninja generator.
+set(CMAKE_USER_MAKE_RULES_OVERRIDE ${CMAKE_CURRENT_LIST_DIR}/cmake/set_extensions.cmake)
+
+# Cmake makes it _really_ hard to dynamically set the cmake_system_processor
+# (used for setting mcpu flags etc). Instead we load
+# platform/ext/target/${TFM_PLATFORM}/preload.cmake, which should run this macro
+# to reload the compiler autoconfig. Note that it can't be loaded in this file
+# as cmake does not allow the use of command-line defined variables in toolchain
+# files and the path is platform dependent.
+macro(_compiler_reload)
+ set(CMAKE_SYSTEM_PROCESSOR ${TFM_SYSTEM_PROCESSOR})
+ set(CMAKE_SYSTEM_ARCHITECTURE ${TFM_SYSTEM_ARCHITECTURE})
+
+ set_property(DIRECTORY PROPERTY COMPILE_OPTIONS "")
+ set_property(DIRECTORY PROPERTY LINK_OPTIONS "")
+ if(${CMAKE_C_COMPILER_VERSION} VERSION_GREATER_EQUAL "6.11")
+ add_compile_options(
+ --target=arm-arm-none-eabi
+ -Wno-ignored-optimization-argument
+ -Wno-unused-command-line-argument
+ -c
+ -fdata-sections
+ -ffunction-sections
+ -fno-builtin
+ -fshort-enums
+ -fshort-wchar
+ -funsigned-char
+ -masm=auto
+ -nostdlib
+ -std=c99
+ $<$<NOT:$<BOOL:${TFM_SYSTEM_FP}>>:-mfpu=none>
+ )
+ else()
+ # Compile options for legacy compiler 6.10.1. To be removed as soon that
+ # that compiler can be deprecated.
+ add_compile_options(
+ $<$<COMPILE_LANGUAGE:C>:--target=arm-arm-none-eabi>
+ $<$<COMPILE_LANGUAGE:C>:-Wno-ignored-optimization-argument>
+ $<$<COMPILE_LANGUAGE:C>:-Wno-unused-command-line-argument>
+ $<$<COMPILE_LANGUAGE:C>:-Wall>
+ # Don't error when the MBEDTLS_NULL_ENTROPY warning is shown
+ $<$<COMPILE_LANGUAGE:C>:-Wno-error=cpp>
+ $<$<COMPILE_LANGUAGE:C>:-c>
+ $<$<COMPILE_LANGUAGE:C>:-fdata-sections>
+ $<$<COMPILE_LANGUAGE:C>:-ffunction-sections>
+ $<$<COMPILE_LANGUAGE:C>:-fno-builtin>
+ $<$<COMPILE_LANGUAGE:C>:-fshort-enums>
+ $<$<COMPILE_LANGUAGE:C>:-fshort-wchar>
+ $<$<COMPILE_LANGUAGE:C>:-funsigned-char>
+ $<$<COMPILE_LANGUAGE:C>:-masm=auto>
+ $<$<COMPILE_LANGUAGE:C>:-nostdlib>
+ $<$<COMPILE_LANGUAGE:C>:-std=c99>
+ $<$<AND:$<COMPILE_LANGUAGE:C>,$<NOT:$<BOOL:${TFM_SYSTEM_FP}>>>:-mfpu=none>
+ $<$<COMPILE_LANGUAGE:ASM>:--cpu=${CMAKE_SYSTEM_PROCESSOR}>
+ $<$<AND:$<COMPILE_LANGUAGE:ASM>,$<NOT:$<BOOL:${TFM_SYSTEM_FP}>>>:--fpu=none>
+ )
+ set(COMPILER_CMSE_FLAG $<$<COMPILE_LANGUAGE:C>:-mcmse>)
+ endif()
+ add_link_options(
+ --info=summarysizes,sizes,totals,unused,veneers
+ --strict
+ --symbols
+ --xref
+ # Suppress link warnings that are consistant (and therefore hopefully
+ # harmless)
+ # https://developer.arm.com/documentation/100074/0608/linker-errors-and-warnings/list-of-the-armlink-error-and-warning-messages
+ # Empty region description
+ --diag_suppress=6312
+ # Ns section matches pattern
+ --diag_suppress=6314
+ # Duplicate input files
+ --diag_suppress=6304
+ $<$<NOT:$<BOOL:${TFM_SYSTEM_FP}>>:--fpu=softvfp>
+ )
+
+ if (DEFINED TFM_SYSTEM_FP)
+ if(TFM_SYSTEM_FP)
+ # TODO Whether a system requires these extensions appears to depend
+ # on the system in question, with no real rule. Since adding +fp
+ # will cause compile failures on systems that already have fp
+ # enabled, this is commented out for now to avoid those failures. In
+ # future, better handling should be implemented.
+ # string(APPEND CMAKE_SYSTEM_PROCESSOR "+fp")
+ else()
+ string(APPEND CMAKE_SYSTEM_PROCESSOR "+nofp")
+ endif()
+ endif()
+
+ if (DEFINED TFM_SYSTEM_DSP)
+ if(TFM_SYSTEM_DSP)
+ # TODO Whether a system requires these extensions appears to depend
+ # on the system in question, with no real rule. Since adding +dsp
+ # will cause compile failures on systems that already have dsp
+ # enabled, this is commented out for now to avoid those failures. In
+ # future, better handling should be implemented.
+ # string(APPEND CMAKE_SYSTEM_PROCESSOR "+dsp")
+ else()
+ string(APPEND CMAKE_SYSTEM_PROCESSOR "+nodsp")
+ endif()
+ endif()
+
+ unset(CMAKE_C_FLAGS_INIT)
+ unset(CMAKE_C_LINK_FLAGS)
+ unset(CMAKE_ASM_FLAGS_INIT)
+ unset(CMAKE_ASM_LINK_FLAGS)
+
+ # cmake does not allow the use of +dsp / +nofpu syntax. An override is added
+ # here to enable it. First reset the supported CPU list in case this has
+ # already been run.
+ __armclang_set_processor_list(C CMAKE_C_COMPILER_PROCESSOR_LIST)
+ __armclang_set_processor_list(ASM CMAKE_ASM_COMPILER_PROCESSOR_LIST)
+ # Then use regex to add +dsp +nodsp +fpu and +nofp options
+ # TODO generate this combinatorially
+ list(TRANSFORM CMAKE_C_COMPILER_PROCESSOR_LIST REPLACE "^(.+)$" "\\1;\\1+fp;\\1+nofp;")
+ list(TRANSFORM CMAKE_C_COMPILER_PROCESSOR_LIST REPLACE "^(.+)$" "\\1;\\1+dsp;\\1+nodsp;")
+ list(TRANSFORM CMAKE_ASM_COMPILER_PROCESSOR_LIST REPLACE "^(.+)$" "\\1;\\1+fp;\\1+nofp;")
+ list(TRANSFORM CMAKE_ASM_COMPILER_PROCESSOR_LIST REPLACE "^(.+)$" "\\1;\\1+dsp;\\1+nodsp;")
+
+ __compiler_armclang(C)
+
+ if(${CMAKE_C_COMPILER_VERSION} VERSION_GREATER_EQUAL "6.11")
+ __compiler_armclang(ASM)
+ else()
+ # Because armclang<6.11 does not have an integrated assembler that
+ # supports the ASM syntax used by the CMSIS startup files, it is
+ # required to manuall invoke armasm. CMake does not support that when
+ # using armclang as the declared compiler, so instead we use some of the
+ # internals from ArmCC which uses armasm by default.
+ find_program(ARMASM_PATH armasm HINTS "${_CMAKE_C_TOOLCHAIN_LOCATION}")
+ set(CMAKE_ASM_COMPILER ${ARMASM_PATH})
+ include(${CMAKE_ROOT}/Modules/Compiler/ARMCC.cmake)
+ include(${CMAKE_ROOT}/Modules/Compiler/ARMCC-ASM.cmake)
+ __compiler_armcc(ASM)
+ endif()
+
+ set(CMAKE_C_FLAGS ${CMAKE_C_FLAGS_INIT})
+ set(CMAKE_ASM_FLAGS ${CMAKE_ASM_FLAGS_INIT})
+
+ # But armlink doesn't support this +dsp syntax, so take the cpu flag and
+ # throw away the plus and everything after.
+ string(REGEX REPLACE "(--cpu=.*)\\+[a-z\\+]*[ ]?" "\\1" CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS}")
+ string(REGEX REPLACE "(--cpu=.*)\\+[a-z\\+]*[ ]?" "\\1" CMAKE_ASM_LINK_FLAGS "${CMAKE_ASM_LINK_FLAGS}")
+endmacro()
+
+# Behaviour for handling scatter files is so wildly divergent between compilers
+# that this macro is required.
+macro(target_add_scatter_file target)
+ target_link_options(${target}
+ PRIVATE
+ --scatter=$<TARGET_OBJECTS:${target}_scatter>
+ )
+
+ add_dependencies(${target}
+ ${target}_scatter
+ )
+
+ add_library(${target}_scatter OBJECT)
+ foreach(scatter_file ${ARGN})
+ target_sources(${target}_scatter
+ PRIVATE
+ ${scatter_file}
+ )
+ # Cmake cannot use generator expressions in the
+ # set_source_file_properties command, so instead we just parse the regex
+ # for the filename and set the property on all files, regardless of if
+ # the generator expression would evaluate to true or not.
+ string(REGEX REPLACE ".*>:(.*)>$" "\\1" SCATTER_FILE_PATH "${scatter_file}")
+ set_source_files_properties(${SCATTER_FILE_PATH}
+ PROPERTIES
+ LANGUAGE C
+ )
+ endforeach()
+
+ set_target_properties(${target}_scatter PROPERTIES
+ SUFFIX ".ld"
+ )
+
+ target_link_libraries(${target}_scatter
+ platform_region_defs
+ psa_interface
+ tfm_partition_defs
+ )
+
+ target_compile_options(${target}_scatter
+ PRIVATE
+ -E
+ -xc
+ )
+endmacro()
+
+macro(add_convert_to_bin_target target)
+ get_target_property(bin_dir ${target} RUNTIME_OUTPUT_DIRECTORY)
+
+ add_custom_target(${target}_bin
+ SOURCES ${bin_dir}/${target}.bin
+ )
+ add_custom_command(OUTPUT ${bin_dir}/${target}.bin
+ DEPENDS ${target}
+ COMMAND fromelf
+ --bincombined $<TARGET_FILE:${target}>
+ --output=${bin_dir}/${target}.bin
+ )
+
+ add_custom_target(${target}_elf
+ SOURCES ${bin_dir}/${target}.elf
+ )
+ add_custom_command(OUTPUT ${bin_dir}/${target}.elf
+ DEPENDS ${target}
+ COMMAND fromelf
+ --elf $<TARGET_FILE:${target}>
+ --output=${bin_dir}/${target}.elf
+ )
+
+ add_custom_target(${target}_hex
+ SOURCES ${bin_dir}/${target}.hex
+ )
+ add_custom_command(OUTPUT ${bin_dir}/${target}.hex
+ DEPENDS ${target}
+ COMMAND fromelf
+ --i32combined $<TARGET_FILE:${target}>
+ --output=${bin_dir}/${target}.hex
+ )
+
+ add_custom_target(${target}_binaries
+ ALL
+ DEPENDS ${target}_bin
+ DEPENDS ${target}_elf
+ DEPENDS ${target}_hex
+ )
+endmacro()