aboutsummaryrefslogtreecommitdiff
path: root/drivers/st/pmic/stm32_i2c.c
blob: f861ba29634a42fd47a56e2258aedbfb385a3d00 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
/*
 * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <errno.h>
#include <stdbool.h>
#include <stdlib.h>

#include <arch_helpers.h>
#include <drivers/delay_timer.h>
#include <drivers/st/stm32_i2c.h>
#include <lib/mmio.h>

/* STM32 I2C registers offsets */
#define I2C_CR1			0x00U
#define I2C_CR2			0x04U
#define I2C_OAR1		0x08U
#define I2C_OAR2		0x0CU
#define I2C_TIMINGR		0x10U
#define I2C_TIMEOUTR		0x14U
#define I2C_ISR			0x18U
#define I2C_ICR			0x1CU
#define I2C_PECR		0x20U
#define I2C_RXDR		0x24U
#define I2C_TXDR		0x28U

#define MAX_DELAY		0xFFFFFFFFU

/* I2C TIMING clear register Mask */
#define TIMING_CLEAR_MASK	0xF0FFFFFFU
/* Timeout 25 ms */
#define I2C_TIMEOUT_BUSY	25U

#define MAX_NBYTE_SIZE		255U

static int i2c_request_memory_write(struct i2c_handle_s *hi2c,
				    uint16_t dev_addr, uint16_t mem_addr,
				    uint16_t mem_add_size, uint32_t timeout,
				    uint32_t tick_start);
static int i2c_request_memory_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
				   uint16_t mem_addr, uint16_t mem_add_size,
				   uint32_t timeout, uint32_t tick_start);

/* Private functions to handle flags during polling transfer */
static int i2c_wait_flag(struct i2c_handle_s *hi2c, uint32_t flag,
			 uint8_t awaited_value, uint32_t timeout,
			 uint32_t tick_start);
static int i2c_wait_txis(struct i2c_handle_s *hi2c, uint32_t timeout,
			 uint32_t tick_start);
static int i2c_wait_stop(struct i2c_handle_s *hi2c, uint32_t timeout,
			 uint32_t tick_start);
static int i2c_ack_failed(struct i2c_handle_s *hi2c, uint32_t timeout,
			  uint32_t tick_start);

/* Private function to flush TXDR register */
static void i2c_flush_txdr(struct i2c_handle_s *hi2c);

/* Private function to start, restart or stop a transfer */
static void i2c_transfer_config(struct i2c_handle_s *hi2c, uint16_t dev_addr,
				uint16_t size, uint32_t i2c_mode,
				uint32_t request);

/*
 * @brief  Initialize the I2C device.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @retval 0 if OK, negative value else
 */
int stm32_i2c_init(struct i2c_handle_s *hi2c)
{
	if (hi2c == NULL) {
		return -ENOENT;
	}

	if (hi2c->i2c_state == I2C_STATE_RESET) {
		hi2c->lock = 0;
	}

	hi2c->i2c_state = I2C_STATE_BUSY;

	/* Disable the selected I2C peripheral */
	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);

	/* Configure I2Cx: Frequency range */
	mmio_write_32(hi2c->i2c_base_addr + I2C_TIMINGR,
		      hi2c->i2c_init.timing & TIMING_CLEAR_MASK);

	/* Disable Own Address1 before set the Own Address1 configuration */
	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_OAR1, I2C_OAR1_OA1EN);

	/* Configure I2Cx: Own Address1 and ack own address1 mode */
	if (hi2c->i2c_init.addressing_mode == I2C_ADDRESSINGMODE_7BIT) {
		mmio_write_32(hi2c->i2c_base_addr + I2C_OAR1,
			      I2C_OAR1_OA1EN | hi2c->i2c_init.own_address1);
	} else { /* I2C_ADDRESSINGMODE_10BIT */
		mmio_write_32(hi2c->i2c_base_addr + I2C_OAR1,
			      I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE |
			      hi2c->i2c_init.own_address1);
	}

	/* Configure I2Cx: Addressing Master mode */
	if (hi2c->i2c_init.addressing_mode == I2C_ADDRESSINGMODE_10BIT) {
		mmio_write_32(hi2c->i2c_base_addr + I2C_CR2, I2C_CR2_ADD10);
	}

	/*
	 * Enable the AUTOEND by default, and enable NACK
	 * (should be disable only during Slave process)
	 */
	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR2,
			I2C_CR2_AUTOEND | I2C_CR2_NACK);

	/* Disable Own Address2 before set the Own Address2 configuration */
	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_OAR2, I2C_DUALADDRESS_ENABLE);

	/* Configure I2Cx: Dual mode and Own Address2 */
	mmio_write_32(hi2c->i2c_base_addr + I2C_OAR2,
		      hi2c->i2c_init.dual_address_mode |
		      hi2c->i2c_init.own_address2 |
		      (hi2c->i2c_init.own_address2_masks << 8));

	/* Configure I2Cx: Generalcall and NoStretch mode */
	mmio_write_32(hi2c->i2c_base_addr + I2C_CR1,
		      hi2c->i2c_init.general_call_mode |
		      hi2c->i2c_init.no_stretch_mode);

	/* Enable the selected I2C peripheral */
	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);

	hi2c->i2c_err = I2C_ERROR_NONE;
	hi2c->i2c_state = I2C_STATE_READY;
	hi2c->i2c_mode = I2C_MODE_NONE;

	return 0;
}

/*
 * @brief  Write an amount of data in blocking mode to a specific memory address
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  dev_addr: Target device address
 * @param  mem_addr: Internal memory address
 * @param  mem_add_size: size of internal memory address
 * @param  p_data: Pointer to data buffer
 * @param  size: Amount of data to be sent
 * @param  timeout: timeout duration
 * @retval 0 if OK, negative value else
 */
int stm32_i2c_mem_write(struct i2c_handle_s *hi2c, uint16_t dev_addr,
			uint16_t mem_addr, uint16_t mem_add_size,
			uint8_t *p_data, uint16_t size, uint32_t timeout)
{
	uint32_t tickstart;

	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
		return -EBUSY;
	}

	if ((p_data == NULL) || (size == 0U)) {
		return -EINVAL;
	}

	hi2c->lock = 1;

	tickstart = (uint32_t)read_cntpct_el0();

	if (i2c_wait_flag(hi2c, I2C_FLAG_BUSY, 1, I2C_TIMEOUT_BUSY,
			  tickstart) != 0) {
		return -EIO;
	}

	hi2c->i2c_state     = I2C_STATE_BUSY_TX;
	hi2c->i2c_mode      = I2C_MODE_MEM;
	hi2c->i2c_err = I2C_ERROR_NONE;

	hi2c->p_buff  = p_data;
	hi2c->xfer_count = size;

	/* Send Slave Address and Memory Address */
	if (i2c_request_memory_write(hi2c, dev_addr, mem_addr, mem_add_size,
				     timeout, tickstart) != 0) {
		hi2c->lock = 0;
		return -EIO;
	}

	/*
	 * Set NBYTES to write and reload
	 * if hi2c->xfer_count > MAX_NBYTE_SIZE
	 */
	if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
		hi2c->xfer_size = MAX_NBYTE_SIZE;
		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
				    I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
	} else {
		hi2c->xfer_size = hi2c->xfer_count;
		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
				    I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
	}

	do {
		if (i2c_wait_txis(hi2c, timeout, tickstart) != 0) {
			return -EIO;
		}

		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR, *hi2c->p_buff);
		hi2c->p_buff++;
		hi2c->xfer_count--;
		hi2c->xfer_size--;

		if ((hi2c->xfer_count != 0U) && (hi2c->xfer_size == 0U)) {
			/* Wait until TCR flag is set */
			if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout,
					  tickstart) != 0) {
				return -EIO;
		}

			if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
				hi2c->xfer_size = MAX_NBYTE_SIZE;
				i2c_transfer_config(hi2c, dev_addr,
						    hi2c->xfer_size,
						    I2C_RELOAD_MODE,
						    I2C_NO_STARTSTOP);
			} else {
				hi2c->xfer_size = hi2c->xfer_count;
				i2c_transfer_config(hi2c, dev_addr,
						    hi2c->xfer_size,
						    I2C_AUTOEND_MODE,
						    I2C_NO_STARTSTOP);
			}
		}

	} while (hi2c->xfer_count > 0U);

	/*
	 * No need to Check TC flag, with AUTOEND mode the stop
	 * is automatically generated.
	 * Wait until STOPF flag is reset.
	 */
	if (i2c_wait_stop(hi2c, timeout, tickstart) != 0) {
		return -EIO;
	}

	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);

	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);

	hi2c->i2c_state = I2C_STATE_READY;
	hi2c->i2c_mode  = I2C_MODE_NONE;

	hi2c->lock = 0;

	return 0;
}

/*
 * @brief  Read an amount of data in blocking mode from a specific memory
 *	   address
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  dev_addr: Target device address
 * @param  mem_addr: Internal memory address
 * @param  mem_add_size: size of internal memory address
 * @param  p_data: Pointer to data buffer
 * @param  size: Amount of data to be sent
 * @param  timeout: timeout duration
 * @retval 0 if OK, negative value else
 */
int stm32_i2c_mem_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
		       uint16_t mem_addr, uint16_t mem_add_size,
		       uint8_t *p_data, uint16_t size, uint32_t timeout)
{
	uint32_t tickstart;

	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
		return -EBUSY;
	}

	if ((p_data == NULL) || (size == 0U)) {
		return  -EINVAL;
	}

	hi2c->lock = 1;

	tickstart = (uint32_t)read_cntpct_el0();

	if (i2c_wait_flag(hi2c, I2C_FLAG_BUSY, 1, I2C_TIMEOUT_BUSY,
			  tickstart) != 0) {
		return -EIO;
	}

	hi2c->i2c_state     = I2C_STATE_BUSY_RX;
	hi2c->i2c_mode      = I2C_MODE_MEM;
	hi2c->i2c_err = I2C_ERROR_NONE;

	hi2c->p_buff  = p_data;
	hi2c->xfer_count = size;

	/* Send Slave Address and Memory Address */
	if (i2c_request_memory_read(hi2c, dev_addr, mem_addr, mem_add_size,
				    timeout, tickstart) != 0) {
		hi2c->lock = 0;
		return -EIO;
	}

	/*
	 * Send Slave Address.
	 * Set NBYTES to write and reload if hi2c->xfer_count > MAX_NBYTE_SIZE
	 * and generate RESTART.
	 */
	if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
		hi2c->xfer_size = MAX_NBYTE_SIZE;
		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
				    I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
	} else {
		hi2c->xfer_size = hi2c->xfer_count;
		i2c_transfer_config(hi2c, dev_addr, hi2c->xfer_size,
				    I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
	}

	do {
		if (i2c_wait_flag(hi2c, I2C_FLAG_RXNE, 0, timeout,
				  tickstart) != 0) {
			return -EIO;
		}

		*hi2c->p_buff = mmio_read_8(hi2c->i2c_base_addr + I2C_RXDR);
		hi2c->p_buff++;
		hi2c->xfer_size--;
		hi2c->xfer_count--;

		if ((hi2c->xfer_count != 0U) && (hi2c->xfer_size == 0U)) {
			if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout,
					  tickstart) != 0) {
				return -EIO;
			}

			if (hi2c->xfer_count > MAX_NBYTE_SIZE) {
				hi2c->xfer_size = MAX_NBYTE_SIZE;
				i2c_transfer_config(hi2c, dev_addr,
						    hi2c->xfer_size,
						    I2C_RELOAD_MODE,
						    I2C_NO_STARTSTOP);
			} else {
				hi2c->xfer_size = hi2c->xfer_count;
				i2c_transfer_config(hi2c, dev_addr,
						    hi2c->xfer_size,
						    I2C_AUTOEND_MODE,
						    I2C_NO_STARTSTOP);
			}
		}
	} while (hi2c->xfer_count > 0U);

	/*
	 * No need to Check TC flag, with AUTOEND mode the stop
	 * is automatically generated
	 * Wait until STOPF flag is reset
	 */
	if (i2c_wait_stop(hi2c, timeout, tickstart) != 0) {
		return -EIO;
	}

	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);

	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);

	hi2c->i2c_state = I2C_STATE_READY;
	hi2c->i2c_mode  = I2C_MODE_NONE;

	hi2c->lock = 0;

	return 0;
}

/*
 * @brief  Checks if target device is ready for communication.
 * @note   This function is used with Memory devices
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  dev_addr: Target device address
 * @param  trials: Number of trials
 * @param  timeout: timeout duration
 * @retval 0 if OK, negative value else
 */
int stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c,
			      uint16_t dev_addr, uint32_t trials,
			      uint32_t timeout)
{
	uint32_t i2c_trials = 0U;

	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
		return -EBUSY;
	}

	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_BUSY) !=
	    0U) {
		return -EBUSY;
	}

	hi2c->lock = 1;

	hi2c->i2c_state = I2C_STATE_BUSY;
	hi2c->i2c_err = I2C_ERROR_NONE;

	do {
		uint32_t tickstart;

		/* Generate Start */
		if (hi2c->i2c_init.addressing_mode == I2C_ADDRESSINGMODE_7BIT) {
			mmio_write_32(hi2c->i2c_base_addr + I2C_CR2,
				      (((uint32_t)dev_addr & I2C_CR2_SADD) |
				       I2C_CR2_START | I2C_CR2_AUTOEND) &
				       ~I2C_CR2_RD_WRN);
		} else {
			mmio_write_32(hi2c->i2c_base_addr + I2C_CR2,
				      (((uint32_t)dev_addr & I2C_CR2_SADD) |
				       I2C_CR2_START | I2C_CR2_ADD10) &
				      ~I2C_CR2_RD_WRN);
		}

		/*
		 * No need to Check TC flag, with AUTOEND mode the stop
		 * is automatically generated
		 * Wait until STOPF flag is set or a NACK flag is set
		 */
		tickstart = (uint32_t)read_cntpct_el0();
		while (((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
			 (I2C_FLAG_STOPF | I2C_FLAG_AF)) == 0U) &&
		       (hi2c->i2c_state != I2C_STATE_TIMEOUT)) {
			if (timeout != MAX_DELAY) {
				if ((((uint32_t)read_cntpct_el0() - tickstart) >
				     timeout) || (timeout == 0U)) {
					hi2c->i2c_state = I2C_STATE_READY;

					hi2c->i2c_err |=
						I2C_ERROR_TIMEOUT;

					hi2c->lock = 0;

					return -EIO;
				}
			}
		}

		/* Check if the NACKF flag has not been set */
		if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
		     I2C_FLAG_AF) == 0U) {
			if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout,
					  tickstart) != 0) {
				return -EIO;
			}

			mmio_write_32(hi2c->i2c_base_addr + I2C_ICR,
				      I2C_FLAG_STOPF);

			hi2c->i2c_state = I2C_STATE_READY;

			hi2c->lock = 0;

			return 0;
		}

		if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout,
				  tickstart) != 0) {
			return -EIO;
		}

		mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_AF);

		mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);

		if (i2c_trials == trials) {
			mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR2,
					I2C_CR2_STOP);

			if (i2c_wait_flag(hi2c, I2C_FLAG_STOPF, 0, timeout,
					  tickstart) != 0) {
				return -EIO;
			}

			mmio_write_32(hi2c->i2c_base_addr + I2C_ICR,
				      I2C_FLAG_STOPF);
		}

		i2c_trials++;
	} while (i2c_trials < trials);

	hi2c->i2c_state = I2C_STATE_READY;

	hi2c->i2c_err |= I2C_ERROR_TIMEOUT;

	hi2c->lock = 0;

	return -EIO;
}

/*
 * @brief  Master sends target device address followed by internal memory
 *	   address for write request.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  dev_addr: Target device address
 * @param  mem_addr: Internal memory address
 * @param  mem_add_size: size of internal memory address
 * @param  timeout: timeout duration
 * @param  tick_start Tick start value
 * @retval 0 if OK, negative value else
 */
static int i2c_request_memory_write(struct i2c_handle_s *hi2c,
				    uint16_t dev_addr, uint16_t mem_addr,
				    uint16_t mem_add_size, uint32_t timeout,
				    uint32_t tick_start)
{
	i2c_transfer_config(hi2c, dev_addr, mem_add_size, I2C_RELOAD_MODE,
			    I2C_GENERATE_START_WRITE);

	if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
		return -EIO;
	}

	if (mem_add_size == I2C_MEMADD_SIZE_8BIT) {
		/* Send Memory Address */
		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
			     (uint8_t)(mem_addr & 0x00FFU));
	} else {
		/* Send MSB of Memory Address */
		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
			     (uint8_t)((mem_addr & 0xFF00U) >> 8));

		/* Wait until TXIS flag is set */
		if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
			return -EIO;
		}

		/* Send LSB of Memory Address */
		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
			     (uint8_t)(mem_addr & 0x00FFU));
	}

	if (i2c_wait_flag(hi2c, I2C_FLAG_TCR, 0, timeout, tick_start) !=
	    0) {
		return -EIO;
	}

	return 0;
}

/*
 * @brief  Master sends target device address followed by internal memory
 *	   address for read request.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  dev_addr: Target device address
 * @param  mem_addr: Internal memory address
 * @param  mem_add_size: size of internal memory address
 * @param  timeout: timeout duration
 * @param  tick_start Tick start value
 * @retval 0 if OK, negative value else
 */
static int i2c_request_memory_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
				   uint16_t mem_addr, uint16_t mem_add_size,
				   uint32_t timeout, uint32_t tick_start)
{
	i2c_transfer_config(hi2c, dev_addr, mem_add_size, I2C_SOFTEND_MODE,
			    I2C_GENERATE_START_WRITE);

	if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
		return -EIO;
	}

	if (mem_add_size == I2C_MEMADD_SIZE_8BIT) {
		/* Send Memory Address */
		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
			     (uint8_t)(mem_addr & 0x00FFU));
	} else {
		/* Send MSB of Memory Address */
		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
			     (uint8_t)((mem_addr & 0xFF00U) >> 8));

		/* Wait until TXIS flag is set */
		if (i2c_wait_txis(hi2c, timeout, tick_start) != 0) {
			return -EIO;
		}

		/* Send LSB of Memory Address */
		mmio_write_8(hi2c->i2c_base_addr + I2C_TXDR,
			     (uint8_t)(mem_addr & 0x00FFU));
	}

	if (i2c_wait_flag(hi2c, I2C_FLAG_TC, 0, timeout, tick_start) != 0) {
		return -EIO;
	}

	return 0;
}

/*
 * @brief  I2C Tx data register flush process.
 * @param  hi2c: I2C handle.
 * @retval None
 */
static void i2c_flush_txdr(struct i2c_handle_s *hi2c)
{
	/*
	 * If a pending TXIS flag is set,
	 * write a dummy data in TXDR to clear it.
	 */
	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_TXIS) !=
	    0U) {
		mmio_write_32(hi2c->i2c_base_addr + I2C_TXDR, 0);
	}

	/* Flush TX register if not empty */
	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_TXE) ==
	    0U) {
		mmio_setbits_32(hi2c->i2c_base_addr + I2C_ISR,
				I2C_FLAG_TXE);
	}
}

/*
 * @brief  This function handles I2C Communication timeout.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  flag: Specifies the I2C flag to check.
 * @param  awaited_value: The awaited bit value for the flag (0 or 1).
 * @param  timeout: timeout duration
 * @param  tick_start: Tick start value
 * @retval 0 if OK, negative value else
 */
static int i2c_wait_flag(struct i2c_handle_s *hi2c, uint32_t flag,
			 uint8_t awaited_value, uint32_t timeout,
			 uint32_t tick_start)
{
	uint8_t flag_check;

	do {
		flag_check = ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
			       flag) == flag) ? 1U : 0U;

		if (timeout != MAX_DELAY) {
			if ((((uint32_t)read_cntpct_el0() - tick_start) >
			     timeout) || (timeout == 0U)) {
				hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
				hi2c->i2c_state = I2C_STATE_READY;
				hi2c->i2c_mode = I2C_MODE_NONE;

				hi2c->lock = 0;
				return -EIO;
			}
		}
	} while (flag_check == awaited_value);

	return 0;
}

/*
 * @brief  This function handles I2C Communication timeout for specific usage
 *	   of TXIS flag.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  timeout: timeout duration
 * @param  tick_start: Tick start value
 * @retval 0 if OK, negative value else
 */
static int i2c_wait_txis(struct i2c_handle_s *hi2c, uint32_t timeout,
			 uint32_t tick_start)
{
	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
		I2C_FLAG_TXIS) == 0U) {
		if (i2c_ack_failed(hi2c, timeout, tick_start) != 0) {
			return -EIO;
		}

		if (timeout != MAX_DELAY) {
			if ((((uint32_t)read_cntpct_el0() - tick_start) >
			     timeout) || (timeout == 0U)) {
				hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
				hi2c->i2c_state = I2C_STATE_READY;
				hi2c->i2c_mode = I2C_MODE_NONE;

				hi2c->lock = 0;

				return -EIO;
			}
		}
	}

	return 0;
}

/*
 * @brief  This function handles I2C Communication timeout for specific
 *	   usage of STOP flag.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  timeout: timeout duration
 * @param  tick_start: Tick start value
 * @retval 0 if OK, negative value else
 */
static int i2c_wait_stop(struct i2c_handle_s *hi2c, uint32_t timeout,
			 uint32_t tick_start)
{
	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
		 I2C_FLAG_STOPF) == 0U) {
		if (i2c_ack_failed(hi2c, timeout, tick_start) != 0) {
			return -EIO;
		}

		if ((((uint32_t)read_cntpct_el0() - tick_start) > timeout) ||
		    (timeout == 0U)) {
			hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
			hi2c->i2c_state = I2C_STATE_READY;
			hi2c->i2c_mode = I2C_MODE_NONE;

			hi2c->lock = 0;

			return -EIO;
		}
	}

	return 0;
}

/*
 * @brief  This function handles Acknowledge failed detection during
 *	   an I2C Communication.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2C.
 * @param  timeout: timeout duration
 * @param  tick_start: Tick start value
 * @retval 0 if OK, negative value else
 */
static int i2c_ack_failed(struct i2c_handle_s *hi2c, uint32_t timeout,
			  uint32_t tick_start)
{
	if ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) & I2C_FLAG_AF) == 0U) {
		return 0;
	}

	/*
	 * Wait until STOP Flag is reset.
	 * AutoEnd should be initiate after AF.
	 */
	while ((mmio_read_32(hi2c->i2c_base_addr + I2C_ISR) &
		I2C_FLAG_STOPF) == 0U) {
		if (timeout != MAX_DELAY) {
			if ((((uint32_t)read_cntpct_el0() - tick_start) >
			     timeout) || (timeout == 0U)) {
				hi2c->i2c_err |= I2C_ERROR_TIMEOUT;
				hi2c->i2c_state = I2C_STATE_READY;
				hi2c->i2c_mode = I2C_MODE_NONE;

				hi2c->lock = 0;

				return -EIO;
			}
		}
	}

	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_AF);

	mmio_write_32(hi2c->i2c_base_addr + I2C_ICR, I2C_FLAG_STOPF);

	i2c_flush_txdr(hi2c);

	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR2, I2C_RESET_CR2);

	hi2c->i2c_err |= I2C_ERROR_AF;
	hi2c->i2c_state = I2C_STATE_READY;
	hi2c->i2c_mode = I2C_MODE_NONE;

	hi2c->lock = 0;

	return -EIO;
}

/*
 * @brief  Handles I2Cx communication when starting transfer or during transfer
 *	   (TC or TCR flag are set).
 * @param  hi2c: I2C handle.
 * @param  dev_addr: Specifies the slave address to be programmed.
 * @param  size: Specifies the number of bytes to be programmed.
 *   This parameter must be a value between 0 and 255.
 * @param  i2c_mode: New state of the I2C START condition generation.
 *   This parameter can be one of the following values:
 *     @arg @ref I2C_RELOAD_MODE: Enable Reload mode .
 *     @arg @ref I2C_AUTOEND_MODE: Enable Automatic end mode.
 *     @arg @ref I2C_SOFTEND_MODE: Enable Software end mode.
 * @param  request: New state of the I2C START condition generation.
 *   This parameter can be one of the following values:
 *     @arg @ref I2C_NO_STARTSTOP: Don't Generate stop and start condition.
 *     @arg @ref I2C_GENERATE_STOP: Generate stop condition
 *                                  (size should be set to 0).
 *     @arg @ref I2C_GENERATE_START_READ: Generate Restart for read request.
 *     @arg @ref I2C_GENERATE_START_WRITE: Generate Restart for write request.
 * @retval None
 */
static void i2c_transfer_config(struct i2c_handle_s *hi2c, uint16_t dev_addr,
				uint16_t size, uint32_t i2c_mode,
				uint32_t request)
{
	uint32_t clr_value, set_value;

	clr_value = (I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD |
		     I2C_CR2_AUTOEND | I2C_CR2_START | I2C_CR2_STOP) |
		(I2C_CR2_RD_WRN & (request >> (31U - I2C_CR2_RD_WRN_OFFSET)));

	set_value = ((uint32_t)dev_addr & I2C_CR2_SADD) |
		(((uint32_t)size << I2C_CR2_NBYTES_OFFSET) & I2C_CR2_NBYTES) |
		i2c_mode | request;

	mmio_clrsetbits_32(hi2c->i2c_base_addr + I2C_CR2, clr_value, set_value);
}

/*
 * @brief  Configure I2C Analog noise filter.
 * @param  hi2c: Pointer to a struct i2c_handle_s structure that contains
 *               the configuration information for the specified I2Cx peripheral
 * @param  analog_filter: New state of the Analog filter.
 * @retval 0 if OK, negative value else
 */
int stm32_i2c_config_analog_filter(struct i2c_handle_s *hi2c,
				   uint32_t analog_filter)
{
	if ((hi2c->i2c_state != I2C_STATE_READY) || (hi2c->lock != 0U)) {
		return -EBUSY;
	}

	hi2c->lock = 1;

	hi2c->i2c_state = I2C_STATE_BUSY;

	/* Disable the selected I2C peripheral */
	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);

	/* Reset I2Cx ANOFF bit */
	mmio_clrbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_ANFOFF);

	/* Set analog filter bit*/
	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, analog_filter);

	/* Enable the selected I2C peripheral */
	mmio_setbits_32(hi2c->i2c_base_addr + I2C_CR1, I2C_CR1_PE);

	hi2c->i2c_state = I2C_STATE_READY;

	hi2c->lock = 0;

	return 0;
}