path: root/bl1/aarch32/bl1_entrypoint.S
AgeCommit message (Collapse)Author
2021-04-21Add PIE support for AARCH32Yann Gautier
Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just stubbed with _pie_fixup_size=0. The changes are an adaptation for AARCH32 on what has been done for PIE support on AARCH64. The RELA_SECTION is redefined for AARCH32, as the created section is .rel.dyn and the symbols are .rel*. Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9 Signed-off-by: Yann Gautier <yann.gautier@st.com>
2019-02-27BL1: Enable pointer authentication supportAntonio Nino Diaz
The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +108 | +192 | +0 | +0 | | | 0.5% | 0.8% | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +748 | +192 | +16 | +0 | | | 3.7% | 0.8% | 7.0% | | +----------------------------+-------+-------+-------+--------+ Results calculated with the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ SDEI_SUPPORT=1 \ EL3_EXCEPTION_HANDLING=1 \ TSP_NS_INTR_ASYNC_PREEMPT=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I3a7d02feb6a6d212be32a01432b0c7c1a261f567 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-04Sanitise includes across codebaseAntonio Nino Diaz
Enforce full include path for includes. Deprecate old paths. The following folders inside include/lib have been left unchanged: - include/lib/cpus/${ARCH} - include/lib/el3_runtime/${ARCH} The reason for this change is that having a global namespace for includes isn't a good idea. It defeats one of the advantages of having folders and it introduces problems that are sometimes subtle (because you may not know the header you are actually including if there are two of them). For example, this patch had to be created because two headers were called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform to avoid collision."). More recently, this patch has had similar problems: 46f9b2c3a282 ("drivers: add tzc380 support"). This problem was introduced in commit 4ecca33988b9 ("Move include and source files to logical locations"). At that time, there weren't too many headers so it wasn't a real issue. However, time has shown that this creates problems. Platforms that want to preserve the way they include headers may add the removed paths to PLAT_INCLUDES, but this is discouraged. Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-03-21Rename 'smcc' to 'smccc'Antonio Nino Diaz
When the source code says 'SMCC' it is talking about the SMC Calling Convention. The correct acronym is SMCCC. This affects a few definitions and file names. Some files have been renamed (smcc.h, smcc_helpers.h and smcc_macros.S) but the old files have been kept for compatibility, they include the new ones with an ERROR_DEPRECATED guard. Change-Id: I78f94052a502436fdd97ca32c0fe86bd58173f2f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-06-21Fully initialise essential control registersDavid Cunado
This patch updates the el3_arch_init_common macro so that it fully initialises essential control registers rather then relying on hardware to set the reset values. The context management functions are also updated to fully initialise the appropriate control registers when initialising the non-secure and secure context structures and when preparing to leave EL3 for a lower EL. This gives better alignement with the ARM ARM which states that software must initialise RES0 and RES1 fields with 0 / 1. This patch also corrects the following typos: "NASCR definitions" -> "NSACR definitions" Change-Id: Ia8940b8351dc27bc09e2138b011e249655041cfc Signed-off-by: David Cunado <david.cunado@arm.com>
2017-05-15AArch32: Add `TRUSTED_BOARD_BOOT` supportdp-arm
This patch adds `TRUSTED_BOARD_BOOT` support for AArch32 mode. To build this patch the "mbedtls/include/mbedtls/bignum.h" needs to be modified to remove `#define MBEDTLS_HAVE_UDBL` when `MBEDTLS_HAVE_INT32` is defined. This is a workaround for "https://github.com/ARMmbed/mbedtls/issues/708" NOTE: TBBR support on Juno AArch32 is not currently supported. Change-Id: I86d80e30b9139adc4d9663f112801ece42deafcf Signed-off-by: dp-arm <dimitris.papastamos@arm.com> Co-Authored-By: Yatharth Kochar <yatharth.kochar@arm.com>
2017-05-12AArch32: Rework SMC context save and restore mechanismSoby Mathew
The current SMC context data structure `smc_ctx_t` and related helpers are optimized for case when SMC call does not result in world switch. This was the case for SP_MIN and BL1 cold boot flow. But the firmware update usecase requires world switch as a result of SMC and the current SMC context helpers were not helping very much in this regard. Therefore this patch does the following changes to improve this: 1. Add monitor stack pointer, `spmon` to `smc_ctx_t` The C Runtime stack pointer in monitor mode, `sp_mon` is added to the SMC context, and the `smc_ctx_t` pointer is cached in `sp_mon` prior to exit from Monitor mode. This makes is easier to retrieve the context when the next SMC call happens. As a result of this change, the SMC context helpers no longer depend on the stack to save and restore the register. This aligns it with the context save and restore mechanism in AArch64. 2. Add SCR in `smc_ctx_t` Adding the SCR register to `smc_ctx_t` makes it easier to manage this register state when switching between non secure and secure world as a result of an SMC call. Change-Id: I5e12a7056107c1701b457b8f7363fdbf892230bf Signed-off-by: Soby Mathew <soby.mathew@arm.com> Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
2017-05-03Use SPDX license identifiersdp-arm
To make software license auditing simpler, use SPDX[0] license identifiers instead of duplicating the license text in every file. NOTE: Files that have been imported by FreeBSD have not been modified. [0]: https://spdx.org/ Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
2016-09-21AArch32: Add generic changes in BL1Yatharth Kochar
This patch adds generic changes in BL1 to support AArch32 state. New AArch32 specific assembly/C files are introduced and some files are moved to AArch32/64 specific folders. BL1 for AArch64 is refactored but functionally identical. BL1 executes in Secure Monitor mode in AArch32 state. NOTE: BL1 in AArch32 state ONLY handles BL1_RUN_IMAGE SMC. Change-Id: I6e2296374c7efbf3cf2aa1a0ce8de0732d8c98a5