aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--plat/arm/board/fvp/fvp_gicv3.c119
-rw-r--r--plat/arm/board/fvp/include/fconf_hw_config_getter.h4
-rw-r--r--plat/arm/board/fvp/platform.mk4
3 files changed, 125 insertions, 2 deletions
diff --git a/plat/arm/board/fvp/fvp_gicv3.c b/plat/arm/board/fvp/fvp_gicv3.c
new file mode 100644
index 0000000000..a3ee8ef1b9
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_gicv3.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <platform_def.h>
+
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv3.h>
+#include <fconf_hw_config_getter.h>
+#include <lib/utils.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+static uintptr_t fvp_rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+/* Default GICR base address to be used for GICR probe. */
+static uint64_t fvp_gicr_base_addrs[2] = { 0U };
+
+/* List of zero terminated GICR frame addresses which CPUs will probe */
+static uint64_t *fvp_gicr_frames = fvp_gicr_base_addrs;
+
+static const interrupt_prop_t fvp_interrupt_props[] = {
+ PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
+ PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
+};
+
+/*
+ * MPIDR hashing function for translating MPIDRs read from GICR_TYPER register
+ * to core position.
+ *
+ * Calculating core position is dependent on MPIDR_EL1.MT bit. However, affinity
+ * values read from GICR_TYPER don't have an MT field. To reuse the same
+ * translation used for CPUs, we insert MT bit read from the PE's MPIDR into
+ * that read from GICR_TYPER.
+ *
+ * Assumptions:
+ *
+ * - All CPUs implemented in the system have MPIDR_EL1.MT bit set;
+ * - No CPUs implemented in the system use affinity level 3.
+ */
+static unsigned int fvp_gicv3_mpidr_hash(u_register_t mpidr)
+{
+ u_register_t temp_mpidr = mpidr;
+
+ temp_mpidr |= (read_mpidr_el1() & MPIDR_MT_MASK);
+ return plat_arm_calc_core_pos(temp_mpidr);
+}
+
+
+static gicv3_driver_data_t fvp_gic_data = {
+ .interrupt_props = fvp_interrupt_props,
+ .interrupt_props_num = ARRAY_SIZE(fvp_interrupt_props),
+ .rdistif_num = PLATFORM_CORE_COUNT,
+ .rdistif_base_addrs = fvp_rdistif_base_addrs,
+ .mpidr_to_core_pos = fvp_gicv3_mpidr_hash
+};
+
+void plat_arm_gic_driver_init(void)
+{
+ /* Get GICD and GICR base addressed through FCONF APIs */
+#if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+ (defined(__aarch64__) && defined(IMAGE_BL31))
+ fvp_gic_data.gicd_base = (uintptr_t)FCONF_GET_PROPERTY(hw_config,
+ gicv3_config,
+ gicd_base);
+ fvp_gicr_base_addrs[0] = FCONF_GET_PROPERTY(hw_config, gicv3_config,
+ gicr_base);
+#else
+ fvp_gic_data.gicd_base = PLAT_ARM_GICD_BASE;
+ fvp_gicr_base_addrs[0] = PLAT_ARM_GICR_BASE;
+#endif
+
+ /*
+ * The GICv3 driver is initialized in EL3 and does not need
+ * to be initialized again in SEL1. This is because the S-EL1
+ * can use GIC system registers to manage interrupts and does
+ * not need GIC interface base addresses to be configured.
+ */
+
+#if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+ (defined(__aarch64__) && defined(IMAGE_BL31))
+ gicv3_driver_init(&fvp_gic_data);
+ if (gicv3_rdistif_probe((uintptr_t)fvp_gicr_base_addrs[0]) == -1) {
+ ERROR("No GICR base frame found for Primary CPU\n");
+ panic();
+ }
+#endif
+}
+
+/******************************************************************************
+ * Function to iterate over all GICR frames and discover the corresponding
+ * per-cpu redistributor frame as well as initialize the corresponding
+ * interface in GICv3.
+ *****************************************************************************/
+void plat_arm_gic_pcpu_init(void)
+{
+ int result;
+ const uint64_t *plat_gicr_frames = fvp_gicr_frames;
+
+ do {
+ result = gicv3_rdistif_probe(*plat_gicr_frames);
+
+ /* If the probe is successful, no need to proceed further */
+ if (result == 0)
+ break;
+
+ plat_gicr_frames++;
+ } while (*plat_gicr_frames != 0U);
+
+ if (result == -1) {
+ ERROR("No GICR base frame found for CPU 0x%lx\n", read_mpidr());
+ panic();
+ }
+ gicv3_rdistif_init(plat_my_core_pos());
+}
diff --git a/plat/arm/board/fvp/include/fconf_hw_config_getter.h b/plat/arm/board/fvp/include/fconf_hw_config_getter.h
index a9e569e782..dbce0e4247 100644
--- a/plat/arm/board/fvp/include/fconf_hw_config_getter.h
+++ b/plat/arm/board/fvp/include/fconf_hw_config_getter.h
@@ -15,8 +15,8 @@
#define hw_config__topology_getter(prop) soc_topology.prop
struct gicv3_config_t {
- uintptr_t gicd_base;
- uintptr_t gicr_base;
+ uint64_t gicd_base;
+ uint64_t gicr_base;
};
struct hw_topology_t {
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index 04cebcac38..a88ec13362 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -65,6 +65,10 @@ FVP_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c
+ ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_BL31} ${RESET_TO_SP_MIN}),)
+ FVP_GIC_SOURCES += plat/arm/board/fvp/fvp_gicv3.c
+ endif
+
else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV2)
# No GICv4 extension