aboutsummaryrefslogtreecommitdiff
path: root/plat/arm/common/arm_gicv3.c
diff options
context:
space:
mode:
authorAchin Gupta <achin.gupta@arm.com>2015-11-03 14:18:34 +0000
committerSoby Mathew <soby.mathew@arm.com>2015-12-09 09:58:17 +0000
commit27573c59a6bf16c2330b41453f87bdd60afb2144 (patch)
tree5acb19308327ffec91119c8864a6e678d2c1401a /plat/arm/common/arm_gicv3.c
parentf14d188681b2c6f49ccd22595b112da7b02798f8 (diff)
downloadtrusted-firmware-a-27573c59a6bf16c2330b41453f87bdd60afb2144.tar.gz
Rework use of ARM GIC drivers on ARM platforms
Suport for ARM GIC v2.0 and v3.0 drivers has been reworked to create three separate drivers instead of providing a single driver that can work on both versions of the GIC architecture. These drivers correspond to the following software use cases: 1. A GICv2 only driver that can run only on ARM GIC v2.0 implementations e.g. GIC-400 2. A GICv3 only driver that can run only on ARM GIC v3.0 implementations e.g. GIC-500 in a mode where all interrupt regimes use GICv3 features 3. A deprecated GICv3 driver that operates in legacy mode. This driver can operate only in the GICv2 mode in the secure world. On a GICv3 system, this driver allows normal world to run in either GICv3 mode (asymmetric mode) or in the GICv2 mode. Both modes of operation are deprecated on GICv3 systems. ARM platforms implement both versions of the GIC architecture. This patch adds a layer of abstraction to help ARM platform ports chose the right GIC driver and corresponding platform support. This is as described below: 1. A set of ARM common functions have been introduced to initialise the GIC and the driver during cold and warm boot. These functions are prefixed as "plat_arm_gic_". Weak definitions of these functions have been provided for each type of driver. 2. Each platform includes the sources that implement the right functions directly into the its makefile. The FVP can be instantiated with different versions of the GIC architecture. It uses the FVP_USE_GIC_DRIVER build option to specify which of the three drivers should be included in the build. 3. A list of secure interrupts has to be provided to initialise each of the three GIC drivers. For GIC v3.0 the interrupt ids have to be further categorised as Group 0 and Group 1 Secure interrupts. For GIC v2.0, the two types are merged and treated as Group 0 interrupts. The two lists of interrupts are exported from the platform_def.h. The lists are constructed by adding a list of board specific interrupt ids to a list of ids common to all ARM platforms and Compute sub-systems. This patch also makes some fields of `arm_config` data structure in FVP redundant and these unused fields are removed. Change-Id: Ibc8c087be7a8a6b041b78c2c3bd0c648cd2035d8
Diffstat (limited to 'plat/arm/common/arm_gicv3.c')
-rw-r--r--plat/arm/common/arm_gicv3.c117
1 files changed, 117 insertions, 0 deletions
diff --git a/plat/arm/common/arm_gicv3.c b/plat/arm/common/arm_gicv3.c
new file mode 100644
index 0000000000..33f80183c5
--- /dev/null
+++ b/plat/arm/common/arm_gicv3.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arm_def.h>
+#include <gicv3.h>
+#include <plat_arm.h>
+#include <platform.h>
+#include <platform_def.h>
+
+/******************************************************************************
+ * The following functions are defined as weak to allow a platform to override
+ * the way the GICv3 driver is initialised and used.
+ *****************************************************************************/
+#pragma weak plat_arm_gic_driver_init
+#pragma weak plat_arm_gic_init
+#pragma weak plat_arm_gic_cpuif_enable
+#pragma weak plat_arm_gic_cpuif_disable
+#pragma weak plat_arm_gic_pcpu_init
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+/* Array of Group1 secure interrupts to be configured by the gic driver */
+const unsigned int g1s_interrupt_array[] = {
+ PLAT_ARM_G1S_IRQS
+};
+
+/* Array of Group0 interrupts to be configured by the gic driver */
+const unsigned int g0_interrupt_array[] = {
+ PLAT_ARM_G0_IRQS
+};
+
+const gicv3_driver_data_t arm_gic_data = {
+ .gicd_base = PLAT_ARM_GICD_BASE,
+ .gicr_base = PLAT_ARM_GICR_BASE,
+ .g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array),
+ .g1s_interrupt_num = ARRAY_SIZE(g1s_interrupt_array),
+ .g0_interrupt_array = g0_interrupt_array,
+ .g1s_interrupt_array = g1s_interrupt_array,
+ .rdistif_num = PLATFORM_CORE_COUNT,
+ .rdistif_base_addrs = rdistif_base_addrs,
+ .mpidr_to_core_pos = plat_arm_calc_core_pos
+};
+
+void plat_arm_gic_driver_init(void)
+{
+ /*
+ * The GICv3 driver is initialized in EL3 and does not need
+ * to be initialized again in SEL1. This is because the S-EL1
+ * can use GIC system registers to manage interrupts and does
+ * not need GIC interface base addresses to be configured.
+ */
+#if IMAGE_BL31
+ gicv3_driver_init(&arm_gic_data);
+#endif
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the GIC. Only invoked by BL31
+ *****************************************************************************/
+void plat_arm_gic_init(void)
+{
+ gicv3_distif_init();
+ gicv3_rdistif_init(plat_my_core_pos());
+ gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * ARM common helper to enable the GIC CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_enable(void)
+{
+ gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * ARM common helper to disable the GIC CPU interface
+ *****************************************************************************/
+void plat_arm_gic_cpuif_disable(void)
+{
+ gicv3_cpuif_disable(plat_my_core_pos());
+}
+
+/******************************************************************************
+ * ARM common helper to initialize the per-cpu redistributor interface in GICv3
+ *****************************************************************************/
+void plat_arm_gic_pcpu_init(void)
+{
+ gicv3_rdistif_init(plat_my_core_pos());
+}