aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorManish Pandey <manish.pandey2@arm.com>2020-08-10 23:13:36 +0000
committerTrustedFirmware Code Review <review@review.trustedfirmware.org>2020-08-10 23:13:36 +0000
commit8f09da46e263cdb97f01edce449aa5b769cca2f5 (patch)
treeaa14d4996ba8bef46bfe9e1bbbb1257c6a07b969
parent37a12f04be9f7b5006abe89bef693d1c3c834f29 (diff)
parent3045dfe10c3daaf3eb93f22090e62e062b19b981 (diff)
downloadtrusted-firmware-a-8f09da46e263cdb97f01edce449aa5b769cca2f5.tar.gz
Merge changes from topic "release/14.0" into integration
* changes: docs: marvell: update PHY porting layer description docs: marvell: update path in marvell documentation docs: marvell: update build instructions with CN913x plat: marvell: octeontx: add support for t9130 plat: marvell: t9130: add SVC support plat: marvell: t9130: update AVS settings plat: marvell: t9130: pass actual CP count for load_image plat: marvell: armada: a7k: add support to SVC validation mode plat: marvell: armada: add support for twin-die combined memory device
-rw-r--r--docs/plat/marvell/armada/build.rst22
-rw-r--r--docs/plat/marvell/armada/porting.rst7
-rw-r--r--include/drivers/marvell/mochi/cp110_setup.h1
-rw-r--r--plat/marvell/armada/a8k/a70x0/board/dram_port.c1
-rw-r--r--plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c1
-rw-r--r--plat/marvell/armada/a8k/a80x0/board/dram_port.c1
-rw-r--r--plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c1
-rw-r--r--plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c1
-rw-r--r--plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c2
-rw-r--r--plat/marvell/armada/a8k/common/plat_ble_setup.c106
-rw-r--r--plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c158
-rw-r--r--plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c188
-rw-r--r--plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h138
-rw-r--r--plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h25
-rw-r--r--plat/marvell/octeontx/otx2/t91/t9130/platform.mk20
15 files changed, 619 insertions, 53 deletions
diff --git a/docs/plat/marvell/armada/build.rst b/docs/plat/marvell/armada/build.rst
index da4ba565a7..6b9054c7c4 100644
--- a/docs/plat/marvell/armada/build.rst
+++ b/docs/plat/marvell/armada/build.rst
@@ -26,7 +26,7 @@ BL33 should be ``~/project/u-boot/u-boot.bin``
*u-boot.bin* should be used and not *u-boot-spl.bin*
-Set MSS/SCP image path (mandatory only for Armada80x0)
+Set MSS/SCP image path (mandatory only for A7K/8K/CN913x)
.. code:: shell
@@ -92,22 +92,31 @@ There are several build options:
- BLE_PATH
- Points to BLE (Binary ROM extension) sources folder. Only required for A8K builds.
+ Points to BLE (Binary ROM extension) sources folder.
+ Only required for A7K/8K/CN913x builds.
The parameter is optional, its default value is ``plat/marvell/armada/a8k/common/ble``.
- MV_DDR_PATH
- For A7/8K, use this parameter to point to mv_ddr driver sources to allow BLE build. For A37x0,
+ For A7K/8K/CN913x, use this parameter to point to mv_ddr driver sources to allow BLE build. For A37x0,
it is used for ddr_tool build.
Usage example: MV_DDR_PATH=path/to/mv_ddr
- The parameter is optional for A7/8K, when this parameter is not set, the mv_ddr
+ The parameter is optional for A7K/8K/CN913x, when this parameter is not set, the mv_ddr
sources are expected to be located at: drivers/marvell/mv_ddr. However, the parameter
is necessary for A37x0.
For the mv_ddr source location, check the section "Tools and external components installation"
+- CP_NUM
+
+ Total amount of CPs (South Bridge) connected to AP. When the parameter is omitted,
+ the build uses the default number of CPs, which is a number of embedded CPs inside the
+ package: 1 or 2 depending on the SoC used. The parameter is valid for OcteonTX2 CN913x SoC
+ family (PLAT=t9130), which can have external CPs connected to the MCI ports. Valid
+ values with CP_NUM are in a range of 1 to 3.
+
- DDR_TOPOLOGY
For Armada37x0 only, the DDR topology map index/name, default is 0.
@@ -191,7 +200,8 @@ There are several build options:
- a70x0
- a70x0_amc (for AMC board)
- a80x0
- - a80x0_mcbin (for MacciatoBin)
+ - a80x0_mcbin (for MacchiatoBin)
+ - t9130 (OcteonTX2 CN913x)
Special Build Flags
--------------------
@@ -199,7 +209,7 @@ Special Build Flags
- PLAT_RECOVERY_IMAGE_ENABLE
When set this option to enable secondary recovery function when build atf.
In order to build UART recovery image this operation should be disabled for
- a70x0 and a80x0 because of hardware limitation (boot from secondary image
+ A7K/8K/CN913x because of hardware limitation (boot from secondary image
can interrupt UART recovery process). This MACRO definition is set in
``plat/marvell/armada/a8k/common/include/platform_def.h`` file.
diff --git a/docs/plat/marvell/armada/porting.rst b/docs/plat/marvell/armada/porting.rst
index 1723ebb577..ba8736dc63 100644
--- a/docs/plat/marvell/armada/porting.rst
+++ b/docs/plat/marvell/armada/porting.rst
@@ -36,7 +36,7 @@ memory map is required.
.. note::
For a detailed information on how CCU, IOWIN, AXI-MBUS & IOB work, please
refer to the SoC functional spec, and under
- ``docs/marvell/misc/mvebu-[ccu/iob/amb/io-win].txt`` files.
+ ``docs/plat/marvell/armada/misc/mvebu-[ccu/iob/amb/io-win].rst`` files.
boot loader recovery (marvell_plat_config.c)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -110,11 +110,6 @@ Comphy Porting (phy-porting-layer.h or phy-default-porting-layer.h)
parameters need to be suited and the board designer should provide relevant
values.
- .. seealso::
- For XFI/SFI comphy type there is procedure "rx_training" which eases
- process of suiting some of the parameters. Please see *uboot_cmd*
- section: rx_training.
-
The PHY porting layer simplifies updating static values per board type,
which are now grouped in one place.
diff --git a/include/drivers/marvell/mochi/cp110_setup.h b/include/drivers/marvell/mochi/cp110_setup.h
index f8cd26b126..11dc4e0201 100644
--- a/include/drivers/marvell/mochi/cp110_setup.h
+++ b/include/drivers/marvell/mochi/cp110_setup.h
@@ -24,6 +24,7 @@
#define MVEBU_3900_DEV_ID (0x6025)
#define MVEBU_80X0_DEV_ID (0x8040)
#define MVEBU_80X0_CP115_DEV_ID (0x8045)
+#define MVEBU_CN9130_DEV_ID (0x7025)
#define MVEBU_CP110_SA_DEV_ID (0x110)
#define MVEBU_CP110_REF_ID_A1 1
#define MVEBU_CP110_REF_ID_A2 2
diff --git a/plat/marvell/armada/a8k/a70x0/board/dram_port.c b/plat/marvell/armada/a8k/a70x0/board/dram_port.c
index 4fca7e3837..355770b652 100644
--- a/plat/marvell/armada/a8k/a70x0/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a70x0/board/dram_port.c
@@ -46,6 +46,7 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_TEMP_LOW} }, /* temperature */
MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
+ NOT_COMBINED, /* ddr twin-die combined*/
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ /* electrical configuration */
diff --git a/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c b/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c
index aecf6c5672..9c8c97e094 100644
--- a/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a70x0_amc/board/dram_port.c
@@ -46,6 +46,7 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_TEMP_LOW} }, /* temperature */
MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
+ NOT_COMBINED, /* ddr twin-die combined*/
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ /* electrical configuration */
diff --git a/plat/marvell/armada/a8k/a80x0/board/dram_port.c b/plat/marvell/armada/a8k/a80x0/board/dram_port.c
index 017d8a734f..381c87150c 100644
--- a/plat/marvell/armada/a8k/a80x0/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a80x0/board/dram_port.c
@@ -58,6 +58,7 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_64BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
#endif
MV_DDR_CFG_SPD, /* ddr configuration data source */
+ NOT_COMBINED, /* ddr twin-die combined*/
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ /* electrical configuration */
diff --git a/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c b/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c
index 25808523c5..50a68b3a2c 100644
--- a/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a80x0_mcbin/board/dram_port.c
@@ -48,6 +48,7 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_TEMP_LOW} }, /* temperature */
MV_DDR_64BIT_BUS_MASK, /* subphys mask */
MV_DDR_CFG_SPD, /* ddr configuration data source */
+ NOT_COMBINED, /* ddr twin-die combined*/
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ /* electrical configuration */
diff --git a/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c b/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c
index 46a9a26b93..3879c983ac 100644
--- a/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c
+++ b/plat/marvell/armada/a8k/a80x0_puzzle/board/dram_port.c
@@ -54,6 +54,7 @@ static struct mv_ddr_topology_map board_topology_map = {
MV_DDR_TEMP_LOW} }, /* temperature */
MV_DDR_64BIT_BUS_MASK, /* subphys mask */
MV_DDR_CFG_SPD, /* ddr configuration data source */
+ NOT_COMBINED, /* ddr twin-die combined*/
{ {0} }, /* raw spd data */
{0}, /* timing parameters */
{ /* electrical configuration */
diff --git a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
index c2cd933578..b919cb337b 100644
--- a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
+++ b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
@@ -138,6 +138,8 @@ uint32_t bl2_plat_get_cp_count(int ap_idx)
if (revision == MVEBU_80X0_DEV_ID ||
revision == MVEBU_80X0_CP115_DEV_ID)
return 2;
+ else if (revision == MVEBU_CN9130_DEV_ID)
+ return CP_COUNT;
else
return 1;
}
diff --git a/plat/marvell/armada/a8k/common/plat_ble_setup.c b/plat/marvell/armada/a8k/common/plat_ble_setup.c
index f11b5ac170..e4e09fb41a 100644
--- a/plat/marvell/armada/a8k/common/plat_ble_setup.c
+++ b/plat/marvell/armada/a8k/common/plat_ble_setup.c
@@ -74,22 +74,9 @@
(0x24 << AVS_LOW_VDD_LIMIT_OFFSET) | \
(0x1 << AVS_SOFT_RESET_OFFSET) | \
(0x1 << AVS_ENABLE_OFFSET))
-/* VDD limit is 0.82V for all A3900 devices
- * AVS offsets are not the same as in A70x0
- */
-#define AVS_A3900_CLK_VALUE ((0x80u << 24) | \
- (0x2c2 << 13) | \
- (0x2c2 << 3) | \
- (0x1 << AVS_SOFT_RESET_OFFSET) | \
- (0x1 << AVS_ENABLE_OFFSET))
-/* VDD is 0.88V for 2GHz clock */
-#define AVS_A3900_HIGH_CLK_VALUE ((0x80u << 24) | \
- (0x2f5 << 13) | \
- (0x2f5 << 3) | \
- (0x1 << AVS_SOFT_RESET_OFFSET) | \
- (0x1 << AVS_ENABLE_OFFSET))
-#define AVS_CN9130_HIGH_CLK_VALUE ((0x80 << 24) | \
+/* VDD is 0.88V for 2GHz clock on CN913x devices */
+#define AVS_AP807_CLK_VALUE ((0x80UL << 24) | \
(0x2dc << 13) | \
(0x2dc << 3) | \
(0x1 << AVS_SOFT_RESET_OFFSET) | \
@@ -123,7 +110,6 @@
#define EFUSE_AP_LD0_REVID_MASK 0xF
#define EFUSE_AP_LD0_BIN_OFFS 16 /* LD0[80:79] */
#define EFUSE_AP_LD0_BIN_MASK 0x3
-#define EFUSE_AP_LD0_SWREV_OFFS 50 /* LD0[115:113] */
#define EFUSE_AP_LD0_SWREV_MASK 0x7
#ifndef MVEBU_SOC_AP807
@@ -137,16 +123,18 @@
#define EFUSE_AP_LD0_SVC2_OFFS 26 /* LD0[96:89] */
#define EFUSE_AP_LD0_SVC3_OFFS 34 /* LD0[104:97] */
#define EFUSE_AP_LD0_WP_MASK 0xFF
+ #define EFUSE_AP_LD0_SWREV_OFFS 50 /* LD0[115:113] */
#else
/* AP807 AVS work points in the LD0 eFuse
* SVC1 work point: LD0[91:81]
* SVC2 work point: LD0[102:92]
* SVC3 work point: LD0[113:103]
*/
- #define EFUSE_AP_LD0_SVC1_OFFS 17 /* LD0[91:81] */
- #define EFUSE_AP_LD0_SVC2_OFFS 28 /* LD0[102:92] */
- #define EFUSE_AP_LD0_SVC3_OFFS 39 /* LD0[113:103] */
- #define EFUSE_AP_LD0_WP_MASK 0x3FF
+ #define EFUSE_AP_LD0_SVC1_OFFS 18 /* LD0[91:81] */
+ #define EFUSE_AP_LD0_SVC2_OFFS 29 /* LD0[102:92] */
+ #define EFUSE_AP_LD0_SVC3_OFFS 40 /* LD0[113:103] */
+ #define EFUSE_AP_LD0_WP_MASK 0x7FF /* 10 data,1 parity */
+ #define EFUSE_AP_LD0_SWREV_OFFS 51 /* LD0[116:114] */
#endif
#define EFUSE_AP_LD0_SVC4_OFFS 42 /* LD0[112:105] */
@@ -229,19 +217,8 @@ static void ble_plat_avs_config(void)
FREQ_MODE_AP_SAR_REG_NUM)));
/* Check which SoC is running and act accordingly */
if (ble_get_ap_type() == CHIP_ID_AP807) {
- /* Increase CPU voltage for higher CPU clock */
- switch (freq_mode) {
- case CPU_2000_DDR_1200_RCLK_1200:
- avs_val = AVS_A3900_HIGH_CLK_VALUE;
- break;
-#ifdef MVEBU_SOC_AP807
- case CPU_2200_DDR_1200_RCLK_1200:
- avs_val = AVS_CN9130_HIGH_CLK_VALUE;
- break;
-#endif
- default:
- avs_val = AVS_A3900_CLK_VALUE;
- }
+
+ avs_val = AVS_AP807_CLK_VALUE;
} else {
/* Check which SoC is running and act accordingly */
@@ -396,6 +373,7 @@ static void ble_plat_svc_config(void)
uint64_t efuse;
uint32_t device_id, single_cluster;
uint16_t svc[4], perr[4], i, sw_ver;
+ uint8_t avs_data_bits, min_sw_ver, svc_fields;
unsigned int ap_type;
/* Set access to LD0 */
@@ -449,22 +427,28 @@ static void ble_plat_svc_config(void)
& EFUSE_AP_LD0_WP_MASK;
INFO("SVC: Efuse WP: [0]=0x%x, [1]=0x%x, [2]=0x%x, [3]=0x%x\n",
svc[0], svc[1], svc[2], svc[3]);
+ avs_data_bits = 7;
+ min_sw_ver = 2; /* parity check from sw revision 2 */
+ svc_fields = 4;
} else {
INFO("SVC: Efuse WP: [0]=0x%x, [1]=0x%x, [2]=0x%x\n",
svc[0], svc[1], svc[2]);
+ avs_data_bits = 10;
+ min_sw_ver = 1; /* parity check required from sw revision 1 */
+ svc_fields = 3;
}
/* Validate parity of SVC workpoint values */
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < svc_fields; i++) {
uint8_t parity, bit;
-
perr[i] = 0;
- for (bit = 1, parity = svc[i] & 1; bit < 7; bit++)
+ for (bit = 1, parity = (svc[i] & 1); bit < avs_data_bits; bit++)
parity ^= (svc[i] >> bit) & 1;
- /* Starting from SW version 2, the parity check is mandatory */
- if ((sw_ver > 1) && (parity != ((svc[i] >> 7) & 1)))
+ /* From SW version 1 or 2 (AP806/AP807), check parity */
+ if ((sw_ver >= min_sw_ver) &&
+ (parity != ((svc[i] >> avs_data_bits) & 1)))
perr[i] = 1; /* register the error */
}
@@ -554,8 +538,19 @@ static void ble_plat_svc_config(void)
if (perr[0])
goto perror;
avs_workpoint = svc[0];
- } else
- avs_workpoint = 0;
+ } else {
+#if MARVELL_SVC_TEST
+ reg_val = mmio_read_32(AVS_EN_CTRL_REG);
+ avs_workpoint = (reg_val &
+ AVS_VDD_LOW_LIMIT_MASK) >>
+ AVS_LOW_VDD_LIMIT_OFFSET;
+ NOTICE("7040 1600Mhz, avs = 0x%x\n",
+ avs_workpoint);
+#else
+ NOTICE("SVC: AVS work point not changed\n");
+ return;
+#endif
+ }
break;
}
} else if (device_id == MVEBU_3900_DEV_ID) {
@@ -578,6 +573,31 @@ static void ble_plat_svc_config(void)
avs_workpoint = svc[0];
break;
}
+ } else if (device_id == MVEBU_CN9130_DEV_ID) {
+ NOTICE("SVC: DEV ID: %s, FREQ Mode: 0x%x\n",
+ "CN913x", freq_pidi_mode);
+ switch (freq_pidi_mode) {
+ case CPU_2200_DDR_1200_RCLK_1200:
+ if (perr[0])
+ goto perror;
+ avs_workpoint = svc[0];
+ break;
+ case CPU_2000_DDR_1200_RCLK_1200:
+ if (perr[1])
+ goto perror;
+ avs_workpoint = svc[1];
+ break;
+ case CPU_1600_DDR_1200_RCLK_1200:
+ if (perr[2])
+ goto perror;
+ avs_workpoint = svc[2];
+ break;
+ default:
+ ERROR("SVC: Unsupported Frequency 0x%x\n",
+ freq_pidi_mode);
+ return;
+
+ }
} else {
ERROR("SVC: Unsupported Device ID 0x%x\n", device_id);
return;
@@ -585,13 +605,17 @@ static void ble_plat_svc_config(void)
/* Set AVS control if needed */
if (avs_workpoint == 0) {
- ERROR("SVC: AVS work point not changed\n");
+ ERROR("SVC: You are using a frequency setup which is\n");
+ ERROR("Not supported by this device\n");
+ ERROR("This may result in malfunction of the device\n");
return;
}
/* Remove parity bit */
if (ap_type != CHIP_ID_AP807)
avs_workpoint &= 0x7F;
+ else
+ avs_workpoint &= 0x3FF;
/* Update WP from EEPROM if needed */
avs_workpoint = avs_update_from_eeprom(avs_workpoint);
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
new file mode 100644
index 0000000000..0befadfc63
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/mentor/mi2cv.h>
+#include <lib/mmio.h>
+
+#include <mv_ddr_if.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+#define MVEBU_CP_MPP_CTRL37_OFFS 20
+#define MVEBU_CP_MPP_CTRL38_OFFS 24
+#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA 0x2
+#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA 0x2
+
+#define MVEBU_MPP_CTRL_MASK 0xf
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+struct mv_ddr_iface dram_iface_ap0 = {
+ .ap_base = MVEBU_REGS_BASE_AP(0),
+ .state = MV_DDR_IFACE_NRDY,
+ .validation = MV_DDR_MEMORY_CHECK,
+ .sscg = SSCG_EN,
+ .id = 0,
+ .iface_base_addr = 0,
+ .tm = {
+ DEBUG_LEVEL_ERROR,
+ 0x1, /* active interfaces */
+ /* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+ { { { {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0},
+ {0x1, 0x0, 0, 0} },
+ SPEED_BIN_DDR_2400T, /* speed_bin */
+ MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
+ MV_DDR_DIE_CAP_8GBIT, /* die capacity */
+ MV_DDR_FREQ_SAR, /* frequency */
+ 0, 0, /* cas_l, cas_wl */
+ MV_DDR_TEMP_LOW} }, /* temperature */
+#if DDR32
+ MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
+#else
+ MV_DDR_64BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
+#endif
+ MV_DDR_CFG_SPD, /* ddr configuration data src */
+ NOT_COMBINED, /* ddr twin-die combined*/
+ { {0} }, /* raw spd data */
+ {0}, /* timing parameters */
+ { /* electrical configuration */
+ { /* memory electrical configuration */
+ MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
+ { /* rtt_park 1cs */
+ MV_DDR_RTT_NOM_PARK_RZQ_DIV4,
+ /* rtt_park 2cs */
+ MV_DDR_RTT_NOM_PARK_RZQ_DIV1
+ },
+ { /* rtt_wr 1cs */
+ MV_DDR_RTT_WR_DYN_ODT_OFF,
+ /* rtt_wr 2cs */
+ MV_DDR_RTT_WR_RZQ_DIV2
+ },
+ MV_DDR_DIC_RZQ_DIV7 /* dic */
+ },
+ { /* phy electrical configuration */
+ MV_DDR_OHM_30, /* data_drv_p */
+ MV_DDR_OHM_30, /* data_drv_n */
+ MV_DDR_OHM_30, /* ctrl_drv_p */
+ MV_DDR_OHM_30, /* ctrl_drv_n */
+ {
+ MV_DDR_OHM_60, /* odt_p 1cs */
+ MV_DDR_OHM_120 /* odt_p 2cs */
+ },
+ {
+ MV_DDR_OHM_60, /* odt_n 1cs */
+ MV_DDR_OHM_120 /* odt_n 2cs */
+ },
+ },
+ { /* mac electrical configuration */
+ MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
+ MV_DDR_ODT_CFG_ALWAYS_ON,/* odtcfg_write */
+ MV_DDR_ODT_CFG_NORMAL /* odtcfg_read */
+ },
+ },
+ },
+};
+
+/* Pointer to the first DRAM interface in the system */
+struct mv_ddr_iface *ptr_iface = &dram_iface_ap0;
+
+struct mv_ddr_iface *mv_ddr_iface_get(void)
+{
+ /* Return current ddr interface */
+ return ptr_iface;
+}
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+ /* Return the board topology as defined in the board code */
+ return &ptr_iface->tm;
+}
+
+static void mpp_config(void)
+{
+ uintptr_t reg;
+ uint32_t val;
+
+ reg = MVEBU_CP_MPP_REGS(0, 4);
+ /* configure CP0 MPP 37 and 38 to i2c */
+ val = mmio_read_32(reg);
+ val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) |
+ (MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS));
+ val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA <<
+ MVEBU_CP_MPP_CTRL37_OFFS) |
+ (MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA <<
+ MVEBU_CP_MPP_CTRL38_OFFS);
+ mmio_write_32(reg, val);
+}
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+ struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
+
+ INFO("Gathering DRAM information\n");
+
+ if (tm->cfg_src == MV_DDR_CFG_SPD) {
+ /* configure MPPs to enable i2c */
+ mpp_config();
+
+ /* initialize i2c */
+ i2c_init((void *)MVEBU_CP0_I2C_BASE);
+
+ /* select SPD memory page 0 to access DRAM configuration */
+ i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+
+ /* read data from spd */
+ i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
+ sizeof(tm->spd_data.all_bytes));
+ }
+}
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
new file mode 100644
index 0000000000..7debd6582a
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <armada_common.h>
+#include <mvebu_def.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map_cp0[] = {
+ /* CP0 SPI1 CS0 Direct Mode access */
+ {0xe800, 0x2000000, AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ switch (base) {
+ case MVEBU_CP_REGS_BASE(0):
+ *win = amb_memory_map_cp0;
+ *size = ARRAY_SIZE(amb_memory_map_cp0);
+ return 0;
+ case MVEBU_CP_REGS_BASE(1):
+ case MVEBU_CP_REGS_BASE(2):
+ default:
+ *size = 0;
+ *win = 0;
+ return 1;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#ifndef IMAGE_BLE
+ /* SB (MCi0) PCIe0-2 on CP1 */
+ {0x00000000e2000000, 0x3000000, MCI_0_TID},
+ /* SB (MCi1) PCIe0-2 on CP2 */
+ {0x00000000e5000000, 0x3000000, MCI_1_TID},
+ /* SB (MCi0) internal regs */
+ {0x00000000f4000000, 0x2000000, MCI_0_TID},
+ /* SB (MCi1) internal regs */
+ {0x00000000f6000000, 0x2000000, MCI_1_TID},
+ /* MCI 0 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
+ /* MCI 1 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
+#endif
+};
+
+/* Global Control Register - window default target */
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+ /*
+ * PIDI == iMCIP AP to SB internal MoChi connection.
+ * In other words CP0
+ */
+ return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = io_win_memory_map;
+ if (*win == NULL)
+ *size = 0;
+ else
+ *size = ARRAY_SIZE(io_win_memory_map);
+
+ return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map_cp0[] = {
+ /* SPI1_CS0 (RUNIT) window */
+ {0x00000000e8000000, 0x2000000, RUNIT_TID},
+ /* PEX2_X1 window */
+ {0x00000000e1000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e0000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000c0000000, 0x20000000, PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp1[] = {
+
+ /* PEX2_X1 window */
+ {0x00000000e4000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e3000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000e2000000, 0x1000000, PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp2[] = {
+
+ /* PEX2_X1 window */
+ {0x00000000e7000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e6000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000e5000000, 0x1000000, PEX0_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ switch (base) {
+ case MVEBU_CP_REGS_BASE(0):
+ *win = iob_memory_map_cp0;
+ *size = ARRAY_SIZE(iob_memory_map_cp0);
+ return 0;
+ case MVEBU_CP_REGS_BASE(1):
+ *win = iob_memory_map_cp1;
+ *size = ARRAY_SIZE(iob_memory_map_cp1);
+ return 0;
+ case MVEBU_CP_REGS_BASE(2):
+ *win = iob_memory_map_cp2;
+ *size = ARRAY_SIZE(iob_memory_map_cp2);
+ return 0;
+ default:
+ *size = 0;
+ *win = 0;
+ return 1;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = { /* IO window */
+#ifdef IMAGE_BLE
+ {0x00000000f2000000, 0x6000000, IO_0_TID}, /* IO window */
+#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID},
+#endif
+ {0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
+ {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
+ {0x0000002000000000, 0x70e000000, IO_0_TID}, /* IO for CV-OS */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+ return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = ccu_memory_map;
+ *size = ARRAY_SIZE(ccu_memory_map);
+
+ return 0;
+}
+
+#ifdef IMAGE_BLE
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+void *plat_get_skip_image_data(void)
+{
+ /* No recovery button on CN-9130 board? */
+ return NULL;
+}
+#endif
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h b/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
new file mode 100644
index 0000000000..a8660552e8
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PHY_PORTING_LAYER_H
+#define __PHY_PORTING_LAYER_H
+
+
+#define MAX_LANE_NR 6
+#define XFI_PARAMS static const struct xfi_params
+
+
+XFI_PARAMS xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+ /* AP0 */
+ {
+ /* CP 0 */
+ {
+ { 0 }, /* Comphy0 not relevant*/
+ { 0 }, /* Comphy1 not relevant*/
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c,
+ .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+ .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 1 }, /* Comphy2 */
+ { 0 }, /* Comphy3 not relevant*/
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c,
+ .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+ .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 1 }, /* Comphy4 */
+ { 0 }, /* Comphy5 not relevant*/
+ },
+#if CP_NUM > 1
+ /* CP 1 */
+ {
+ { 0 }, /* Comphy0 not relevant*/
+ { 0 }, /* Comphy1 not relevant*/
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c,
+ .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+ .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 1 }, /* Comphy2 */
+ { 0 }, /* Comphy3 not relevant*/
+ /* different from defaults */
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0xc,
+ .g1_emph = 0x5,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+ .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 1}, /* Comphy4 */
+ { 0 }, /* Comphy5 not relevant*/
+ },
+#if CP_NUM > 2
+ /* CP 2 */
+ {
+ { 0 }, /* Comphy0 not relevant*/
+ { 0 }, /* Comphy1 not relevant*/
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c,
+ .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+ .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 1 }, /* Comphy2 */
+ { 0 }, /* Comphy3 not relevant*/
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c,
+ .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+ .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 1 }, /* Comphy4 */
+ { 0 }, /* Comphy5 not relevant*/
+ },
+#endif
+#endif
+ },
+};
+
+#define SATA_PARAMS static const struct sata_params
+SATA_PARAMS sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+ [0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+ .g1_amp = 0x8, .g2_amp = 0xa,
+ .g3_amp = 0x1e,
+ .g1_emph = 0x1, .g2_emph = 0x2,
+ .g3_emph = 0xe,
+ .g1_emph_en = 0x1, .g2_emph_en = 0x1,
+ .g3_emph_en = 0x1,
+ .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+ .g3_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+ .g3_tx_emph_en = 0x0,
+ .g1_tx_emph = 0x1, .g2_tx_emph = 0x1,
+ .g3_tx_emph = 0x1,
+ .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4,
+ .g3_ffe_cap_sel = 0xf,
+ .align90 = 0x61,
+ .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+ .g3_rx_selmuff = 0x3,
+ .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+ .g3_rx_selmufi = 0x3,
+ .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+ .g3_rx_selmupf = 0x2,
+ .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+ .g3_rx_selmupi = 0x2,
+ .valid = 0x1
+ },
+};
+
+#endif /* __PHY_PORTING_LAYER_H */
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h b/plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h
new file mode 100644
index 0000000000..490be73506
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+/*
+ * CN-9130 has single CP0 inside the package and 2 additional one
+ * from MoChi interface. In case of db-9130-modular board the MCI interface
+ * is routed to:
+ * - on-board CP115 (MCI0)
+ * - extension board CP115 (MCI1)
+ */
+#define CP_COUNT CP_NUM
+#define MVEBU_SOC_AP807 1
+#define I2C_SPD_ADDR 0x53 /* Access SPD data */
+#define I2C_SPD_P0_ADDR 0x36 /* Select SPD data page 0 */
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/platform.mk b/plat/marvell/octeontx/otx2/t91/t9130/platform.mk
new file mode 100644
index 0000000000..1e2716df03
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/platform.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT := 0
+
+CP_NUM := 1
+$(eval $(call add_define,CP_NUM))
+
+DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
+
+MARVELL_MOCHI_DRV := drivers/marvell/mochi/ap807_setup.c
+
+BOARD_DIR := $(shell dirname $(lastword $(MAKEFILE_LIST)))
+include plat/marvell/armada/a8k/common/a8k_common.mk
+
+include plat/marvell/armada/common/marvell_common.mk