aboutsummaryrefslogtreecommitdiff
path: root/plat/hisilicon/poplar
diff options
context:
space:
mode:
authorAntonio Nino Diaz <antonio.ninodiaz@arm.com>2018-09-24 17:15:15 +0100
committerAntonio Nino Diaz <antonio.ninodiaz@arm.com>2018-09-28 15:32:47 +0100
commit82fbaa33e830fa3cc71c1b9c15cec0ce115b3b99 (patch)
tree44e89352f0772fbe6bb61f18496bf218a8bb92e0 /plat/hisilicon/poplar
parent8cff97d1b402f28f8fae727fc2ac13589a15a14d (diff)
downloadtrusted-firmware-a-82fbaa33e830fa3cc71c1b9c15cec0ce115b3b99.tar.gz
poplar: Migrate to new interfaces
- Remove support for LOAD_IMAGE_V2=0. - Replace deprecated bl1_init_bl2_mem_layout(). - Migrate to bl2_early_platform_setup2(). - Migrate to bl31_early_platform_setup2(). - Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE. - Remove references to removed build options. - Update Makefile paths. Change-Id: I52e02633365b3db4244f7ff0f99a6446eae619f0 Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Diffstat (limited to 'plat/hisilicon/poplar')
-rw-r--r--plat/hisilicon/poplar/aarch64/platform_common.c5
-rw-r--r--plat/hisilicon/poplar/bl1_plat_setup.c59
-rw-r--r--plat/hisilicon/poplar/bl2_plat_setup.c164
-rw-r--r--plat/hisilicon/poplar/bl31_plat_setup.c71
-rw-r--r--plat/hisilicon/poplar/include/platform_def.h5
-rw-r--r--plat/hisilicon/poplar/plat_pm.c1
-rw-r--r--plat/hisilicon/poplar/platform.mk16
7 files changed, 60 insertions, 261 deletions
diff --git a/plat/hisilicon/poplar/aarch64/platform_common.c b/plat/hisilicon/poplar/aarch64/platform_common.c
index 549806505..d408209d8 100644
--- a/plat/hisilicon/poplar/aarch64/platform_common.c
+++ b/plat/hisilicon/poplar/aarch64/platform_common.c
@@ -5,7 +5,6 @@
*/
#include <arch_helpers.h>
-#include <arm_gic.h>
#include <assert.h>
#include <bl_common.h>
#include <debug.h>
@@ -29,24 +28,20 @@
TSP_SEC_MEM_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
-#if LOAD_IMAGE_V2
#ifdef SPD_opteed
#define MAP_OPTEE_PAGEABLE MAP_REGION_FLAT( \
POPLAR_OPTEE_PAGEABLE_LOAD_BASE, \
POPLAR_OPTEE_PAGEABLE_LOAD_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#endif
-#endif
static const mmap_region_t poplar_mmap[] = {
MAP_DDR,
MAP_DEVICE,
MAP_TSP_MEM,
-#if LOAD_IMAGE_V2
#ifdef SPD_opteed
MAP_OPTEE_PAGEABLE,
#endif
-#endif
{0}
};
diff --git a/plat/hisilicon/poplar/bl1_plat_setup.c b/plat/hisilicon/poplar/bl1_plat_setup.c
index f40bcf319..c2adc44ec 100644
--- a/plat/hisilicon/poplar/bl1_plat_setup.c
+++ b/plat/hisilicon/poplar/bl1_plat_setup.c
@@ -25,35 +25,39 @@
/* Data structure which holds the extents of the trusted RAM for BL1 */
static meminfo_t bl1_tzram_layout;
+static meminfo_t bl2_tzram_layout;
-meminfo_t *bl1_plat_sec_mem_layout(void)
+/*
+ * Cannot use default weak implementation in bl1_main.c because BL1 RW data is
+ * not at the top of the secure memory.
+ */
+int bl1_plat_handle_post_image_load(unsigned int image_id)
{
- return &bl1_tzram_layout;
-}
+ image_desc_t *image_desc;
+ entry_point_info_t *ep_info;
-#if LOAD_IMAGE_V2
-/*******************************************************************************
- * Function that takes a memory layout into which BL2 has been loaded and
- * populates a new memory layout for BL2 that ensures that BL1's data sections
- * resident in secure RAM are not visible to BL2.
- ******************************************************************************/
-void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
- meminfo_t *bl2_mem_layout)
-{
+ if (image_id != BL2_IMAGE_ID)
+ return 0;
+
+ /* Get the image descriptor */
+ image_desc = bl1_plat_get_image_desc(BL2_IMAGE_ID);
+ assert(image_desc != NULL);
+
+ /* Get the entry point info */
+ ep_info = &image_desc->ep_info;
- assert(bl1_mem_layout != NULL);
- assert(bl2_mem_layout != NULL);
+ bl2_tzram_layout.total_base = BL2_BASE;
+ bl2_tzram_layout.total_size = BL32_LIMIT - BL2_BASE;
- /*
- * Cannot use default weak implementation in bl1main.c because
- * BL1 RW data is not at the top of bl1_mem_layout
- */
- bl2_mem_layout->total_base = BL2_BASE;
- bl2_mem_layout->total_size = BL32_LIMIT - BL2_BASE;
+ flush_dcache_range((uintptr_t)&bl2_tzram_layout, sizeof(meminfo_t));
- flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
+ ep_info->args.arg1 = (uintptr_t)&bl2_tzram_layout;
+
+ VERBOSE("BL1: BL2 memory layout address = %p\n",
+ (void *)&bl2_tzram_layout);
+
+ return 0;
}
-#endif /* LOAD_IMAGE_V2 */
void bl1_early_platform_setup(void)
{
@@ -64,17 +68,6 @@ void bl1_early_platform_setup(void)
bl1_tzram_layout.total_base = BL1_RW_BASE;
bl1_tzram_layout.total_size = BL1_RW_SIZE;
-#if !LOAD_IMAGE_V2
- /* Calculate how much RAM BL1 is using and how much remains free */
- bl1_tzram_layout.free_base = BL1_RW_BASE;
- bl1_tzram_layout.free_size = BL1_RW_SIZE;
-
- reserve_mem(&bl1_tzram_layout.free_base,
- &bl1_tzram_layout.free_size,
- BL1_RAM_BASE,
- BL1_RAM_LIMIT - BL1_RAM_BASE);
-#endif
-
INFO("BL1: 0x%lx - 0x%lx [size = %zu]\n", BL1_RAM_BASE, BL1_RAM_LIMIT,
BL1_RAM_LIMIT - BL1_RAM_BASE);
}
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index 94d59ffb8..a253d3fc8 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -32,49 +32,11 @@
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
-#if !LOAD_IMAGE_V2
-
-/*******************************************************************************
- * This structure represents the superset of information that is passed to
- * BL31, e.g. while passing control to it from BL2, bl31_params
- * and other platform specific params
- ******************************************************************************/
-typedef struct bl2_to_bl31_params_mem {
- bl31_params_t bl31_params;
- image_info_t bl31_image_info;
- image_info_t bl32_image_info;
- image_info_t bl33_image_info;
- entry_point_info_t bl33_ep_info;
- entry_point_info_t bl32_ep_info;
- entry_point_info_t bl31_ep_info;
-} bl2_to_bl31_params_mem_t;
-
-static bl2_to_bl31_params_mem_t bl31_params_mem;
-
-meminfo_t *bl2_plat_sec_mem_layout(void)
-{
- return &bl2_tzram_layout;
-}
-
-#ifdef SCP_BL2_BASE
-void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
-{
- /*
- * This platform has no SCP_BL2 yet
- */
-}
-#endif
-#endif /* LOAD_IMAGE_V2 */
-
/*******************************************************************************
* Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
* Return 0 on success, -1 otherwise.
******************************************************************************/
-#if LOAD_IMAGE_V2
int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
-#else
-int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
-#endif
{
/*
* This platform has no SCP_BL2 yet
@@ -138,7 +100,6 @@ uint32_t poplar_get_spsr_for_bl33_entry(void)
}
#endif /* AARCH32 */
-#if LOAD_IMAGE_V2
int poplar_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
@@ -210,129 +171,10 @@ int bl2_plat_handle_post_image_load(unsigned int image_id)
return poplar_bl2_handle_post_image_load(image_id);
}
-#else /* LOAD_IMAGE_V2 */
-
-bl31_params_t *bl2_plat_get_bl31_params(void)
-{
- bl31_params_t *bl2_to_bl31_params = NULL;
-
- /*
- * Initialise the memory for all the arguments that needs to
- * be passed to BL3-1
- */
- memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));
-
- /* Assign memory for TF related information */
- bl2_to_bl31_params = &bl31_params_mem.bl31_params;
- SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
-
- /* Fill BL3-1 related information */
- bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info,
- PARAM_IMAGE_BINARY, VERSION_1, 0);
-
- /* Fill BL3-2 related information if it exists */
-#ifdef BL32_BASE
- bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
- VERSION_1, 0);
- bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-#endif
-
- /* Fill BL3-3 related information */
- bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
- PARAM_EP, VERSION_1, 0);
-
- /* BL3-3 expects to receive the primary CPU MPID (through x0) */
- bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
-
- bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info,
- PARAM_IMAGE_BINARY, VERSION_1, 0);
-
- return bl2_to_bl31_params;
-}
-
-struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
-{
-#if DEBUG
- bl31_params_mem.bl31_ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL;
-#endif
-
- return &bl31_params_mem.bl31_ep_info;
-}
-
-void bl2_plat_set_bl31_ep_info(image_info_t *image,
- entry_point_info_t *bl31_ep_info)
-{
- SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
- bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS);
-}
-
-/*******************************************************************************
- * Before calling this function BL32 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL32 and set SPSR and security state.
- * On Poplar we only set the security state of the entrypoint
- ******************************************************************************/
-#ifdef BL32_BASE
-void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
- entry_point_info_t *bl32_ep_info)
-{
- SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
- /*
- * The Secure Payload Dispatcher service is responsible for
- * setting the SPSR prior to entry into the BL32 image.
- */
- bl32_ep_info->spsr = 0;
-}
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL32
- ******************************************************************************/
-void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
-{
- /*
- * Populate the extents of memory available for loading BL32.
- */
- bl32_meminfo->total_base = BL32_BASE;
- bl32_meminfo->free_base = BL32_BASE;
- bl32_meminfo->total_size =
- (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
- bl32_meminfo->free_size =
- (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
-}
-#endif /* BL32_BASE */
-
-void bl2_plat_set_bl33_ep_info(image_info_t *image,
- entry_point_info_t *bl33_ep_info)
-{
- SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
- bl33_ep_info->spsr = poplar_get_spsr_for_bl33_entry();
- bl33_ep_info->args.arg2 = image->image_size;
-}
-
-void bl2_plat_flush_bl31_params(void)
-{
- flush_dcache_range((unsigned long)&bl31_params_mem,
- sizeof(bl2_to_bl31_params_mem_t));
-}
-
-void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
-{
- bl33_meminfo->total_base = DDR_BASE;
- bl33_meminfo->total_size = DDR_SIZE;
- bl33_meminfo->free_base = DDR_BASE;
- bl33_meminfo->free_size = DDR_SIZE;
-}
-#endif /* LOAD_IMAGE_V2 */
-
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
{
+ struct meminfo *mem_layout = (struct meminfo *)arg1;
#if !POPLAR_RECOVERY
struct mmc_device_info info;
diff --git a/plat/hisilicon/poplar/bl31_plat_setup.c b/plat/hisilicon/poplar/bl31_plat_setup.c
index ec72acdb9..b45693f5e 100644
--- a/plat/hisilicon/poplar/bl31_plat_setup.c
+++ b/plat/hisilicon/poplar/bl31_plat_setup.c
@@ -6,7 +6,6 @@
#include <arch.h>
#include <arch_helpers.h>
-#include <arm_gic.h>
#include <assert.h>
#include <bl31.h>
#include <bl_common.h>
@@ -67,65 +66,45 @@ entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
* while creating page tables. BL2 has flushed this information to memory, so
* we are guaranteed to pick up good data.
******************************************************************************/
-#if LOAD_IMAGE_V2
-void bl31_early_platform_setup(void *from_bl2,
- void *plat_params_from_bl2)
-#else
-void bl31_early_platform_setup(bl31_params_t *from_bl2,
- void *plat_params_from_bl2)
-#endif
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
{
+ void *from_bl2;
+
+ from_bl2 = (void *) arg0;
+
console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Init console for crash report */
plat_crash_console_init();
-#if LOAD_IMAGE_V2
- /*
- * Check params passed from BL2 should not be NULL,
- */
- bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
-
- assert(params_from_bl2 != NULL);
- assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
- assert(params_from_bl2->h.version >= VERSION_2);
-
- bl_params_node_t *bl_params = params_from_bl2->head;
-
- /*
- * Copy BL33 and BL32 (if present), entry point information.
- * They are stored in Secure RAM, in BL2's address space.
- */
- while (bl_params) {
- if (bl_params->image_id == BL32_IMAGE_ID)
- bl32_image_ep_info = *bl_params->ep_info;
-
- if (bl_params->image_id == BL33_IMAGE_ID)
- bl33_image_ep_info = *bl_params->ep_info;
-
- bl_params = bl_params->next_params_info;
- }
-
- if (bl33_image_ep_info.pc == 0)
- panic();
-
-#else /* LOAD_IMAGE_V2 */
-
/*
* Check params passed from BL2 should not be NULL,
*/
+ bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
assert(params_from_bl2 != NULL);
- assert(params_from_bl2->h.type == PARAM_BL31);
- assert(params_from_bl2->h.version >= VERSION_1);
+ assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+ assert(params_from_bl2->h.version >= VERSION_2);
+
+ bl_params_node_t *bl_params = params_from_bl2->head;
/*
- * Copy BL32 (if populated by BL2) and BL33 entry point information.
+ * Copy BL33 and BL32 (if present), entry point information.
* They are stored in Secure RAM, in BL2's address space.
*/
- if (from_bl2->bl32_ep_info)
- bl32_image_ep_info = *from_bl2->bl32_ep_info;
- bl33_image_ep_info = *from_bl2->bl33_ep_info;
-#endif /* LOAD_IMAGE_V2 */
+ while (bl_params) {
+ if (bl_params->image_id == BL32_IMAGE_ID)
+ bl32_image_ep_info = *bl_params->ep_info;
+
+ if (bl_params->image_id == BL33_IMAGE_ID)
+ bl33_image_ep_info = *bl_params->ep_info;
+
+ bl_params = bl_params->next_params_info;
+ }
+
+ if (bl33_image_ep_info.pc == 0)
+ panic();
}
void bl31_platform_setup(void)
diff --git a/plat/hisilicon/poplar/include/platform_def.h b/plat/hisilicon/poplar/include/platform_def.h
index 824ca34bf..99fd99637 100644
--- a/plat/hisilicon/poplar/include/platform_def.h
+++ b/plat/hisilicon/poplar/include/platform_def.h
@@ -88,13 +88,11 @@
#define BL32_DRAM_BASE 0x03000000
#define BL32_DRAM_LIMIT 0x04000000
-#if LOAD_IMAGE_V2
#ifdef SPD_opteed
/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
#define POPLAR_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 /* 4MB */
#define POPLAR_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - POPLAR_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x03C0_0000 */
#endif
-#endif
#if (POPLAR_TSP_RAM_LOCATION_ID == POPLAR_DRAM_ID)
#define TSP_SEC_MEM_BASE BL32_DRAM_BASE
@@ -122,7 +120,8 @@
#define PLAT_POPLAR_NS_IMAGE_OFFSET 0x37000000
/* Page table and MMU setup constants */
-#define ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
#define MAX_XLAT_TABLES (4)
#define MAX_MMAP_REGIONS (16)
diff --git a/plat/hisilicon/poplar/plat_pm.c b/plat/hisilicon/poplar/plat_pm.c
index 3e43d4d3a..e59cac94c 100644
--- a/plat/hisilicon/poplar/plat_pm.c
+++ b/plat/hisilicon/poplar/plat_pm.c
@@ -5,7 +5,6 @@
*/
#include <arch_helpers.h>
-#include <arm_gic.h>
#include <assert.h>
#include <bl_common.h>
#include <console.h>
diff --git a/plat/hisilicon/poplar/platform.mk b/plat/hisilicon/poplar/platform.mk
index 3cdbe5999..9d2b61700 100644
--- a/plat/hisilicon/poplar/platform.mk
+++ b/plat/hisilicon/poplar/platform.mk
@@ -4,9 +4,6 @@
# SPDX-License-Identifier: BSD-3-Clause
#
-# Enable version2 of image loading
-LOAD_IMAGE_V2 := 1
-
# On Poplar, the TSP can execute from TZC secure area in DRAM.
POPLAR_TSP_RAM_LOCATION ?= dram
ifeq (${POPLAR_TSP_RAM_LOCATION}, dram)
@@ -45,7 +42,6 @@ NEED_BL33 := yes
COLD_BOOT_SINGLE_CPU := 1
PROGRAMMABLE_RESET_ADDRESS := 1
CTX_INCLUDE_FPREGS := 1
-ENABLE_PLAT_COMPAT := 0
ERRATA_A53_855873 := 1
ERRATA_A53_835769 := 1
ERRATA_A53_843419 := 1
@@ -53,9 +49,6 @@ ENABLE_SVE_FOR_NS := 0
WORKAROUND_CVE_2017_5715 := 0
-ARM_GIC_ARCH := 2
-$(eval $(call add_define,ARM_GIC_ARCH))
-
PLAT_PL061_MAX_GPIOS := 104
$(eval $(call add_define,PLAT_PL061_MAX_GPIOS))
@@ -67,12 +60,13 @@ PLAT_INCLUDES := -Iplat/hisilicon/poplar/include \
-Iinclude/drivers/io
PLAT_BL_COMMON_SOURCES := \
- lib/aarch64/xlat_tables.c \
+ lib/xlat_tables/aarch64/xlat_tables.c \
+ lib/xlat_tables/xlat_tables_common.c \
drivers/delay_timer/generic_delay_timer.c \
drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v2/gicv2_helpers.c \
drivers/delay_timer/delay_timer.c \
- drivers/arm/pl011/pl011_console.S \
+ drivers/arm/pl011/aarch64/pl011_console.S \
drivers/arm/gic/v2/gicv2_main.c \
plat/arm/common/aarch64/arm_helpers.S \
plat/arm/common/arm_gicv2.c \
@@ -104,7 +98,6 @@ BL2_SOURCES += \
plat/hisilicon/poplar/bl2_plat_setup.c \
plat/hisilicon/poplar/plat_storage.c
-ifeq (${LOAD_IMAGE_V2},1)
BL2_SOURCES += \
plat/hisilicon/poplar/bl2_plat_mem_params_desc.c \
plat/hisilicon/poplar/poplar_image_load.c \
@@ -114,12 +107,11 @@ ifeq (${SPD},opteed)
BL2_SOURCES += \
lib/optee/optee_utils.c
endif
-endif
BL31_SOURCES += \
lib/cpus/aarch64/aem_generic.S \
lib/cpus/aarch64/cortex_a53.S \
- plat/common/aarch64/plat_psci_common.c \
+ plat/common/plat_psci_common.c \
plat/hisilicon/poplar/bl31_plat_setup.c \
plat/hisilicon/poplar/plat_topology.c \
plat/hisilicon/poplar/plat_pm.c